Stimmen - 5, Durchschnittliche Bewertung: 4.4
(
)
)
|
Anleitung Zusammenfassung
• Press to stop the alarm. 2HR/MONTH button Press to advance the hour or month digits during time/date setting. 3MIN/DATE button Press to advance the minute or date digits during time/date setting. 4YEAR/5-AL ON/OFF button • Press to advance the year digits during date setting. • Press to turn a reminder alarm on or off. 55-AL. SET button Use this button to start a reminder alarm time setting operation. 6SET button Press to cycle through setting screens. 7RESET button Press this button to reset the clock after changing batteries. 8Alarm Mode selector SET: Alarm time setting ON: Alarm on OFF: Alarm off 9Alert Mode Selector BEEP: Beep alert VIB: Vibration alert BEEP & VIB: Both beep and vibration alert Day of the week DATE (month - date) Current time (Hour, minutes, seconds) Vibration alert ON indicator Beep alert ON indicator PM indicator Reminder alarm times (Hour, minutes) Reminder alarm number No.1 ALARM ON (6:00) No.2 ALARM ON (9:30) No.3 ALARM OFF (–:––) No.4 ALARM OFF (–:––) No.5 ALARM ON (PM8:00) Alarm on indicator Daily alarm time (Hour, minutes) MA0212-A • A sticker is affixed to the glass of this clock when you purchase it. Be sure to remove the sticker before using the clock. • Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the illustration. USER’S GUIDE TMR-200 2 TOSET THE TIME 1. Press the SET button (66666) to cycle through the setting screens as shown below. 2. Select the setting you want to change, and then use the HR/MONTH button (22222), MIN/DATE button (33333), and YEAR/5-AL ON/OFF button (44444) to change it. •Holding down any button changes its setting at high speed. •You can set the year in the range of 2000 to 2039. The day of the week is set automatically in accordance with the date setting. •Pressing HR (22222) or MIN (33333) while the Time Setting Screen is on the display causes the seconds count to be reset to 00. 3. After configuring the settings you want, use the SET button (66666) to display the Normal Timekeeping Screen. •The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for about three minutes without performing any operation. USING THEALARM •This clock has a Daily Alarm and a 5 Reminder Alarms. The following table summarizes the features of each alarm type. Time Setting Screen Date Setting Screen Normal Timekeeping Screen Alarm Type Daily Alarm 5 Reminder Alarms SNOOZE Alarm Yes No Alert Duration 1 minute (repeats 7 times every five minutes) 30 seconds For this type of alert: Beep Vibration Beep + Vibration Select this setting: BEEP VIB BEEP&VIB Which is indicated by the display indicator: • For the alarm alert, you can set up the clock to use an audible beeper or a silent vibrator, or the beeper and vibrator in combination. • When an alarm is set and turned on, it performs the specified alert operation each day at the specified time. Pressing any clock button stops an ongoing alert operation. • Note that the Daily Alarm is a snooze alarm. This means that the alert operation is repeated about five minutes after you stop it. To completely stop the Daily Alarm so it does not sound again, slide the Alarm Mode selector (88888) to OFF. Toset the DailyAlarm time 1. Slide the Alarm Mode selector (88888) to SET. This causes the current daily alarm time setting to flash on the display. 2. Press HR (22222) to increase the hour setting and MIN (33333) to increase the minute setting. Holding down either button changes its setting at high speed. 3. After you set the alarm time, slide the Alarm Mode selector (88888) to OFF or ON. •An alarm does not sound if its alarm time is reached while an alarm setting screen is on the display. Toturn the DailyAlarm on and off Slide the Alarm Mode selector (88888) to ON to turn the Daily Alarm on, or OFF to turn it off. •Turning on the Daily Alarm causes the indicator to appear at the bottom of the display. Also, the Daily Alarm time setting appears in the upper part of the display in place of the current date. While the Daily Alarm is turned on, you can view the current month and day by holding down the HR/MONTH button (22222), MIN/DATE button (33333), or YEAR/5-AL ON/OFF button (44444). Toset the 5 ReminderAlarms 1. Press the 5-AL.SET button (55555) until the setting of Reminder Alarm ( ) starts to flash. •This causes the setting of Reminder Alarm ( ) to flash. 2. Press HR (22222) to increase the hour setting and MIN (33333) to increase the minute settings. Holding down either button changes its setting at high speed. 3. Press the 5-AL.SET button (55555) to move the flashing to the next Reminder Alarm ( ). •This causes the setting of the next Reminder Alarm to flash. 4. Repeat steps 2 and 3 to set the other Reminder Alarm times. 5. When Reminder Alarm ( ) is flashing, press the 5-AL.SET button (55555) to return to the Normal Timekeeping Screen. Toturn the 5 ReminderAlarms On and Off 1. Press the 5-AL.SET button (55555) until the setting of...