2. Press the Clock Adj. Button again. The minute display will flash. Press the or Button until the current minute is displayed. Hold for rapid advance. 3. Press the Alarm Set Button during time setting to toggle 12-hour or 24-hour display format. 4. Press the Clock Adj. Button again to confirm the clock setting. You will hear 2 beeps indicating the clock time is set. 5. Press the DST on/off Button located on the back of the unit to add one hour for daylight saving time (on) or to subtract one ho

Move antenna 12” away from unit for best reception. b) Extend © FM Antenna (on back of unit) fully for best reception. Do not strip, alter or attach to other antennas. Tuning and Playing the Radio a) Press the © Radio Button to select radio play mode. Press as needed to select AM, FM1 or FM2 radio band. b) Turn the Set Wheel to tune radio to a desired station. c) To memorize the current station as a preset, press and hold Q Preset Button 1,2,3 or 4. Repeat steps a,b,and c to preset up to 12

Install/Replace backup Battery The iH41 uses a CR2032 battery for backup battery system to provide continuous alarm operation and clock settings in the event of a power failure. If the Backup Battery has been installed and a power failure occurs or the AC cord is accidentally disconnected, the display backlight will not remain lit, but current time and alarm time settings will be temporarily maintained. Otherwise, you must reset the time and alarm settings. 1. Please make sure the AC adaptor is

The battery backup circuit will also operate the buzzer alarm to wake you up at the selected wake up time even if the power is out. The battery backup circuit requires one CR2032 lithium battery, included. When the backup battery is getting weak the Low Backup Battery Indicator will begin flashing in the display. When you see this flashing indicator you should replace the backup battery as soon as possible. Purchase a replacement CR2032 battery, available wherever batteries are sold, and follow

• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzine, thinner or similar materials can damage the surface of the unit. FCC Information FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) T

Dock the already playing iPhone/iPod. The iP21 will automatically turn on and you will hear the music playing from your iPhone/iPod. The iPhone/iPod Icon will appear at the right lower corner the display, indicating iPhone/iPod playing mode. For enhanced bass, press the EXB Expanded Bass Switch located on the back of the unit to turn ON. Note: If the playing song/music loudness is too low on the iPhone/iPod itself, the iP21 may not detect that the iPhone/iPod is in play mode. Press the Button on

• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit. FCC Information FCC Information This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) T