Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
• Never mix old and new batteries, or batteries of different brands. • Never charge the batteries that come with the clock. • Should batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto your skin. • Replace the batteries at least once a year, even if the current batteries are working properly. • The batteries that come with the clock lose some of their power during transport and storage. SPECIFICATIONS Accuracy at normal temperature: ±60 seconds a month Calendar system: Auto-calendar pre-programmed from the year 2000 to 2099 Alarm: Daily Alarm, Snooze Alarm (7 repeats), Demo Alarm Thermometer: Measuring range: 0°C to 40°C Though temperature readings are displayed up to –0.1°C and greater than 40.1°C, note that such readings are actually outside the guaranteed temperature range of this clock. Temperature Sensor Precision: ±2°C in range of 0°C to 40°C Other: LED light; 12/24-hour timekeeping, flashlight Battery: Clock: Two AAA size batteries (Type: R03) Flashlight: Three AAA size batteries (Type: R03) Battery life: Approximately 1 year • 1 minute alarm operation per day • 5 seconds light operation per day Operating temperature: 0°C to 40°C ENGLISH • A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the clock. • Depending on the clock model, its configuration may differ somewhat from that shown in the illustration. Current time (Hour, minutes, seconds) Day of the week Current temperature Date (month - day) Snooze on indicator Alarm on indicator Alarm Off Snooze Alarm On PM indicator Alarm time OPERATING PRECAUTIONS • Do not use or store this clock in areas exposed to temperature extremes, strong magnetism, strong vibration, or strong impact. • Heat can shorten battery life and cause malfunction. Keep the clock away from heaters and direct sunlight when using it. • Never use the clock in a bathroom or any other area subject to high humidity. • Never try to take the clock apart. Doing so can cause malfunction. • To clean the clock, use a soft, dry cloth or a cloth moistened in a solution of water and a mild neutral detergent. Wring out all excess moisture from the cloth. Never use thinner, benzene, alcohol or other similar agents. • The LCD may become difficult to read at temperatures outside of the operating temperature range (0 to 40°C). • Display figures may be difficult to read when viewed from an angle. • Be sure to keep all user documentation handy for future reference. CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any claims by third parties that may arise through the use of this clock. GENERAL GUIDE 1 SNOOZE/LIGHT button • Press this button to illuminate the display for about five seconds. • Pressing this button while the alarm is sounding stops the alarm. 2 3 + / – buttons • Use these buttons to change the alarm time or the setting that is flashing on the display. 4 SET button • Use this button when setting the current time. 5 DEMO button • Press this button to sound the alarm. 6 Alarm Mode selector SNZ: Snooze alarm on ON: Alarm on OFF: Alarm off 7 RESET button • Press this button to reset the clock after replacing its batteries. 8 Batteries (Clock) 9 Batteries (Flashlight) 0 Flashlight A Flashlight ON/OFF switch • Buttons marked “INVALID” are not assigned any function. Press – to change the alarm time setting. Press + to change the alarm time setting. Press – to decrease the flashing digits. Press + to increase the flashing digits. Alarm Mode selector SNZ ( ) ON ( ) OFF Description The alarm sounds at the preset time for one minute, and up to seven more times every five minutes thereafter. Even if you stop the alarm by pressing the SNOOZE/LIGHT button (1), the alarm sounds again five minutes later. • The indicator flashes on the display to indicate that the sn...
Dieses Handbuch ist für folgende Modelle:Armbanduhren - GQ-50 (295.71 kb)