Stimmen - 3, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
Be sure to remove the sticker before using the clock. •Before using this clock for the first time, note the insulation sheet sticking out of the battery compartment. Pull out the insulation sheet in the direction indicated by the arrow before using the clock. •After removing the insulation sheet, press the RESET button (55555). • Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the illustration. Alarm Off Alarm On GENERAL GUIDE 11111SNOOZE button Pressing this button while the alarm is sounding stops the alarm. 22222LIGHT button Press to turn on the backlight. 33333Alarm Time Set buttons Use these buttons to set the alarm time or current time. 44444SET button Use this button when setting the current time. 55555RESET button Press to reset the clock after replacing the battery. 66666Alarm Switch Use this switch to turn the alarm on and off, and to turn on the snooze alarm. 77777Solar panel 88888Insulation sheet Pull out the insulation sheet in the direction indicated by the arrow before using the clock. After removing the insulation sheet, press the RESET button (55555). SETTING THE TIME 1. Press the SET button (44444) to cycle through the setting screens as shown below. Month and Day Setting Screen Time Setting Screen Normal Timekeeping Screen Year Setting Screen 12-hour/24-hour Timekeeping Screen Day of the week Current time (Hour, minutes, seconds) Snooze on indicatorAlarm time Alarm on indicator DATE (month - date) PM indicator USER’S GUIDE DQS-20 2 2. While the screen you want is on the display, use the Alarm Time Set buttons (33333) to change the digits that are flashing. •Holding down + or – changes the flashing digits at high speed. •You can set the year in the range of 2000 to 2039. The day of the week is set automatically in accordance with the date setting. •Pressing + or – while the Time Setting Screen is on the display causes the seconds count to be reset to 00. •Each press of + or – while the 12-hour/24-hour Timekeeping Screen is on the display toggles between 12-hour and 24-hour timekeeping. 3. After making the settings you want, use the SET button (44444) to display the Normal Timekeeping Screen. •The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for about three minutes without performing any operation. USING THEALARM The alarm sounds and the backlight turns on when the alarm time you set is reached. You can also use the Alarm Switch (66666) to select the snooze alarm feature. Setting the Alarm Time Use the Alarm Time Set buttons (33333) to set the alarm time. Pressing an Alarm Time Set button (33333) causes the alarm time to appear in place of the date on the display. •Holding down + or – changes the digits at high speed. Turning the Alarm On and Off Use the Alarm Switch (66666) on the side of the clock to turn the alarm on and off, and to select the snooze feature. •The alarm time appears in place of the date on the display whenever the alarm switch is set to ON or SNOOZE. •The backlight also turns on for the first four seconds that the alarm sounds. •The alarm sound changes over five levels as it sounds. Stopping the Alarm •When alarm is sounding, press the SNOOZE button (11111) to stop it. When the snooze feature is turned on, the alarm will sound again in about five minutes. •To turn off the snooze feature, slide the Alarm Switch (66666) to OFF. Alarm Switch Setting SNOOZE ON ( Zz ) ALARM ON OFF Description The alarm sounds at the preset time for one minute, and seven more times every five minutes thereafter. Even if you stop the alarm sound by pressing the SNOOZE button (11111), the alarm operation is performed again five minutes later. •The indicator Z...