Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Aastra Telecom Dateigröße: 4.79 mb Dateiname: Unterrichtssprache:

#subnet mask: #default gateway: #dns1: #dns2: # Time Server Settings## ===================== #time server disabled: 1 # Time server disabled. #time server1: # Enable time server and enter at #time server2: # least one time server IP address or #time server3: # qualified domain name # Time Server Disabled: # 0 = false, means the time server is not disabled. # 1 = true, means the time server is disabled. # NAT Settings# =============== # Option 1: # # If you are connecting to a Nortel MCS call server and there is a D-4 41-001160-00, Rev 01 Release 2.0 Sample Configuration Files Sample Configuration Files # NAT device between the server and the phone, then you must set the # following two parameters for the phone to function correctly. #sip nortel nat support: 1 # 1 = enabled #sip nortel nat timer: 60 # seconds between keep alive messages # Option 2: # # If you are using a session border controller, you should set the # outbound proxy to the session border controller address #sip outbound proxy: sbc.aastra.com #sip outbound proxy port: 0 # a value of 0 enables SRV # lookups for the address of # the proxy. # Option 3: # # If you know the public IP address of your NAT device and and have # opened up a port for the SIP messages then you can statically # assign this information. #sip nat ip: 67.123.122.90 #sip nat port: 5890 # Additional Network Settings# ============================= #sip rtp port: 3000 # Eg. RTP packets are sent to port 3000. #------------------------------------------------------------------ # Configuration Server Settings Appendix D 41-001160-00, Rev 01 Release 2.0 D-5 IP Phone Administrator Guide Sample Configuration Files ## = = = = = = = = = = = = = = = Appendix D # Notes: This section defines which server the phone retrieves new # firmware images and configuration files from. Three protocols are # supported TFTP, FTP and HTTP download protocol: TFTP ## TFTP server settings tftp server: 192.168.0.130 #alternate tftp server: # valid values are TFTP, FTP and HTTP #use alternate tftp server: 1 # If your DHCP server assigns # a TFTP server address which # you do not use, you can use # the alternate tftp server. ## FTP server settings #ftp server: 192.168.0.131 # can be IP or FQDN #ftp username: aastra #ftp password: 57iaastra ## HTTP server settings (for #http server: bogus.aastra.com # can be IP or FQDN #http path: firmware #------------------------------------------------------------------ # Dial Plan Settings# ===================== # # Notes: # # As you dial a number on the phone, the phone will initiate a call # when one of the following conditions are meet: D-6 41-001160-00, Rev 01 Release 2.0 Sample Configuration Files Sample Configuration Files # # (1) The entered number is an exact match in the dial plan # (2) The "#" symbol has been pressed # (3) A timeout occurs # # The dial plan is a regular expression that supports the following # syntax: # # 0,1,2,3,4,5,6,7,8,9,*,# : matches the keypad symbols # x : matches any digit (0...9) # + : matches 0 or more repetitions of the # : previous expression # [] : matches any number inside the brackets # : can be used with a "-" to represent a # : range # () : expression grouping # | : either or # # # If the dialled number doesn't match the dial plan then the call # is rejected. sip digit timeout: 3 # set the inter-digit timeout in seconds # Example dial plans sip dial plan: "x+#|xx+*" # this is the default dial string, note # that is must be quoted since it contains # a '#' character #sip dial plan: [01]xxx|[2-8]xxxx|91xxxxxxxxxx # accecpt any 4 digit number beginning # with a 0 or 1, any 5 digit number # beginning with a number between 2 and 8 # (inclusive) or a 12 digit number # beginning with 91 Appendix D 41-001160-00, Rev 01 Release 2.0 D-7 IP Phone Administrator Guide Sample Configuration Files Appendix D #sip dial plan terminator: 1 #----------------------------------------------------------------- # General SIP Settings# = = = = = = = = = = = #sip session timer: 30 # enable sending of the "#" symbol to # to the proxy in the dial string # enable support of RFC4028, the default # value of 0 disables this functionality #sip transport protocol: 0 # use UDP (1), TCP (2) or both (0) for sip # messaging #sip use basic codecs: 1 # limit codecs to G711 and G729 #sip out-of-band dtmf: 0 # turn off support for RFC2833 (on by # default) # Global SIP User Settings# ========================== # # Notes: # These settings are used as the default configuration for the hard # key lines on the phone. That is: # # L1 to L4 on the 57i and 57iCT # L1 to L3 on the 53i # # These can be over-ridden on a per-line basis using the per-line # settings. # # See the Admin Guide for a detailed explaination of how this works D-8 41-001160-00, Rev 01 Release 2.0 Sample Configuration Files Sample Configuration Files sip screen name: Joe Smith # the name display on the phone's screen sip user name: 4256 # the phone number sip display name: ...

Herunterladen

Geben Sie zwei Ziffern: