Stimmen - 2, Durchschnittliche Bewertung: 5 ( )

Hersteller: Aastra Telecom Dateigröße: 4.79 mb Dateiname: Unterrichtssprache:

Note: Both the “Directed Call Pickup” feature and the “Playing a Ring Splash” feature are disabled by default. Operational 41-001160-00, Rev 01 Release 2.0 5-51 IP Phone Administrator Guide Operational Features Operational IP Phone Features Enabling/Disabling Directed Call Pickup Use the following procedure to enable or disable the Directed Call Pickup feature on the IP phone. Configuration Files To enable/disable Directed Call Pickup on the IP phone using the configuration files, see Appendix A, the section, “Directed Call Pickup (BLF or XML Call Interception) Settings” on page A-104. Aastra Web UI 1 Click on Basic Settings->Preferences->Directed Call Pickup Settings. 2 Enable the "Directed Call Pickup" field by checking the check box. (Disable this field by unchecking the box). Default is disabled.) 3 Enable the "Play a Ring Splash" field by checking the check box. (Disable this field by unchecking the box). Default is disabled.) The IP phone plays a short "call waiting tone" when there is an incoming call on the BLF monitored extension. If the "Play a Ring Splash" parameter is enabled, and the host tone is idle, the tone plays a "ring splash". 5-52 41-001160-00, Rev 01 Release 2.0 Operational IP Phone Features Operational Features Aastra Web UI 4 Click to save your changes. You must restart your IP phone for the changes to take affect. 5 Click on Operation->Reset. 6 In the "Restart Phone" field click to restart the IP phone and apply the changes. Operational Configuring BLF/BLF List for Directed Call Pickup Use the following procedure to configure BLF/BLF List for Directed Call Pickup in the configuration files. Note: You must enable Directed Call Pickup bofore performing these procedures. See “Enabling/Disabling Directed Call Pickup” on page 5-52. Configuration Files To set BLFor BLF\List in the configuration files for Directed Call Pickup, see Appendix A, the section, “Softkey/Programmable Key/Feature Key Parameters” on page A-108. To enable Directed Call Pickup on the IP phone using the configuration files, see Appendix A, the section, “Directed Call Pickup (BLF or XML Call Interception) Settings” on page A-104. 41-001160-00, Rev 01 Release 2.0 5-53 IP Phone Administrator Guide Operational Features Use the following procedure to configure BLF or BLF/List for Directed Call Pickup in the Aastra Web UI. Operational IP Phone Features Aastra Web UI 1 Click on Basic Settings->Preferences->Directed Call Pickup Settings. 2 Enable the "Directed Call Pickup" field by checking the check box. 3 Enable the "Play a Ring Splash" field by checking the check box. The IP phone plays a short "call waiting tone" when there is an incoming call on the BLF monitored extension. If the "Play a Ring Splash" parameter is enabled, and the host tone is idle, the tone plays a "ring splash". 5-54 41-001160-00, Rev 01 Release 2.0 Operational IP Phone Features Operational Features Aastra Web UI 4 On the 53i: Click on Operation->Programmable Keys. Note: You can configure up to 4 programmable keys on the 53i. Keys 1 and 2 are reserved for the “Save” and “Delete” functions, respectively, and cannot be altered. Operational 41-001160-00, Rev 01 Release 2.0 5-55 IP Phone Administrator Guide Operational Features Operational IP Phone Features Aastra Web UI 5 On the 55i: Click on Operation->Softkeys and XML or on Operation->Programmable Keys. Note: You can configure up to 20 softkeys and up to 6 programmable keys on the 55i. Softkeys and XML Programmable Keys 5-56 41-001160-00, Rev 01 Release 2.0 Operational IP Phone Features Operational Features Aastra Web UI 6 On the 57i/57iCT: Click on Operation->Softkeys and XML and select the “Bottom Keys” tab or the “Top Keys” tab. Note: You can configure up to 20 bottom softkeys and up to 10 top softkeys on the 57i/57i CT. Bottom Keys Top Keys Operational 41-001160-00, Rev 01 Release 2.0 5-57 IP Phone Administrator Guide Operational Features Operational IP Phone Features Aastra Web UI 7 Select a softkey or programmable key to configure. 8 In the "Type" field, select "BLF" (Asterisk), "BLF\List" (BroadSoft BroadWorks). 9 For the 55i, 57i, and 57i CT softkeys: In the "Label" field, enter the name of the person who’s extension you are monitoring (if “Type” is BLF). Note: If BLF\List type is selected, no label value is required. The BroadWorks BLF List name is configured in the "BLF List URI" field instead. 10 In the "Value" field, enter a value to associate with the softkey or programmable key. For example, for BLF, the value is the extension you want to monitor. For BLF\List, the value is an identifier for the list of numbers you are monitoring. 11 Click to save your changes. 12 In the "Line" field, select a line number that is actively registered to the appropriate SIP proxy you are using. 13 In the "BLF List URI" field, enter the name of the BLF list defined on the BroadSoft BroadWorks Busy Lamp field page for your particular user. For example, my57i-blf-list@as.broadworks.com. Note: The value of the B...

Herunterladen

Geben Sie zwei Ziffern: