brush roll and brush roll belt maintenance the brush roll may accumulate debris such as strings, hair and fibers. this type of debris can wrap around the brush and diminish its ability to clean effectively. To remove brush roll for cleaning: 1. Turn power OFF (O). Remove foot 2. assembly from unit and turn over to access the brush roll. 2. Remove three Phillips head screws to remove the belt cover. 3. To remove brush roll, pull on the brush near the belt side. Clean off hair or other debris from

assembly from unit and turn over to access the brush roll. 2. Remove three Phillips head screws to remove the belt cover. 3. To remove brush roll, pull on the brush near the belt side. Clean off hair or other debris from brush roll. 4. Place cleaned brush roll back into foot 3 of unit by aligning the non-belt side so it's seated in the nozzle. 5. Pivot the brush roll so the belt end slides into the slot in the nozzle. 6. Replace the belt cover and secure with three screws. Attach foot assembly o

WaRning: to reduce the risk of fire, electric shock, or injury: ¦ Do not use outdoors or on wet surfaces. ¦ Do not allow to be used as a toy. ¦ Close attention is necessary when used by or near children. ¦ Do not use for any purpose other than described in this User’s Guide. ¦ Use only manufacturer’s recommended attachments. ¦ Do not use with damaged cord or plug. ¦ If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an a