Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Electrolux Dateigröße: 877.51 kb Dateiname: Unterrichtssprache:

Lisez les instructions d'installation, d'opération et d'entretien complètement avant d'installer ou entretenir cet équipement. INSTRUCTION Post in a prominent location instructions to be followed if the user smells gas. Consult the local gas supplier to obtain the information. Présentez dans des instructions en avant d'un endroit d'être suivi si l'utilisateur sent le gaz. Consultez le fournisseur local de gaz pour obtenir l'information. (§x m H Electrolux Against wall - contre une paroi Free standing - isolé Connections - Raccordement ® Gas - Gaz Fig.1 INSTALLATION DRAWINGS - PLANS D'INSTALLATION Doc. 62.9677.01 UL H Electrolux CONTENTS I. GENERAL INFORMATION................................................................................................. 3 II. INSTALLATION INSTRUCTIONS....................................................................................... 5 III. OPERATING INSTRUCTIONS............................................................................................ 9 SOMMAIRE IV. INSTRUCTIONS GÉNÉRALES......................................................................................... 13 V. INSTRUCTIONS RELATIVES À L'INSTALLATION......................................................... 15 VI. INSTRUCTIONS DE FONCTIONNEMENT....................................................................... 19 APPENDIX VII. Nozzle Table - Tableau de gigleur 62.9677.01_UL Page 1 0] Electrolux Page 2 62.9677.01 UL GENERAL INFORMATION H Electrolux I . GENERAL INFORMATION 1. INSTRUCTIONS FOR SAFETY AND USE 1.1 INSTALLATION AND INITIAL OPERATION The installation, adjustment and initial operation of the appliance must be carried out according to the manufacturer's instructions and may only be done by an authorised specialist. Installations for the supply of electricity and gas must be carried out by approved specialists in compliance with specific national and local regulations. They bear the responsibility. The installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54, or the Natural Gas and Propane Installation Code, CSA B1 49.1. The appliance and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at pressures in excess of 1/2 psi (3.5 kPA) The appliance must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piiping system at test pressures equal to or less than 1/2 psi (3.5 kPA) The appliance must not be placed in operation until the user has become familiar with its operation. The operating instructions and the related safety precautions must be followed precisely. Follow strictly the attention and warning label indications on the appliances. 1.2 OPERATOR'S OBLIGATIONS ▲ The manager is responsible for ensuring that all components relevant to safety are in perfect working order at all times. The operating condition of these components must be examined by an authorised specialist at least once a year and any defects remedied if required. ▲ The operator of this appliance is responsible for total observation of the national regulations concerning operating safety. ▲ Remain the manual for future reference. 1.3 U...

Herunterladen

Geben Sie zwei Ziffern: