Stimmen - 5, Durchschnittliche Bewertung: 4.2 ( )

Hersteller: Kenwood Dateigröße: 798.03 kb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Car-Receiver - KRC-17G (830.3 kb)

2CAUTION To prevent damage to take the following precautions: • Make sure to ground the unit 12V DC power supply. • Do not open the top or bottom covers unit. • Do not install the unit in a spot exposed direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. • Do not set the removed faceplate or the faceplate case in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. • To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers. • Do not subject the faceplate to excessive shock, as it is a piece of precision equipment. • When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction. • To prevent short circuits when replacing a fuse, first disconnect the wiring harness. • Do not place any object between the faceplate and the unit. • During installation, do not use any screws except for the ones provided. The use of improper screws might result in damage to the main unit. IMPORTANT INFORMATION About CD players/connected to this KENWOOD disc changers/ released in 1998 or later can this unit. Refer to the catalog for connectable disc changers/ CD players. Note that any KENWOOD disc changers/ players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Unsupported connection may result in break or failure. Setting the O-N Switch to the N position for the applicable KENWOOD disc changers/ CD players. The functions that can be used and the information that can be displayed will differ depending on the models being connected. You can damage both your unit and the CD changer if you connect them incorrectly. — 3— Safety precautions Safety precautions NOTE • If you experience problems installation, consult your • If the unit does not seem right, try pressing the reset button that does not solve the problem, your Kenwood dealer. • Press the reset button if the Disc auto changer fails to operate correctly. Normal operation should be restored. Reset button • Characters in the LCD may become difficult to read in temperatures below 41 °F (5 °C). • The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may represent something impossible in actual operation. Cleaning the If the terminals on dirty, wipe them with a dry, soft cloth. Cleaning the Unit If the faceplate of this unit is stained, with a dry soft cloth such as a silicon If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe neutral detergent off. Applying spray cleaner directly to the un...

Herunterladen

Geben Sie zwei Ziffern: