Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes. What are the limits on JCS’s Liability? JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition. Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty. JCS disclai

Also, when a new blade is installed, it is necessary to check the clearance of the blade to the miter table support before starting the saw. Make adjustments if needed. DEPTH STOP ADJUSTMENTS See Figure 25. • Unplug your saw. A WARNING: Failure to unplug your saw could result in accidental starting causing possible serious personal injury. To adjust the depth stop use a 17 mm wrench or adjustable wrench and loosen the hex nut at the rear of the miter saw arm. Use the 5 mm hex key provided to adj

Push down on the rip fence handle to lock the rip • fence in place. TO INSTALL INDICATOR ON LEFT SIDE REARRAIL HOOKOVER REARRAIL HERE Fig. 12 RIP FENCEHANDLE Fig. 13 CHECKING RIP FENCE AND. BLADE ALIGNMENT The rip fence is self-aligning but should be checked before first use. _. WARNING: Failure to align the rip fence to the blade can cause jams and kickback, resulting in serious personal injury. • Slide the rip fence to the miter gauge groove, which is parallel to blade. Do not lock the rip fen

_I, WARNING: Place the switch out of the immediate work area to avoid accidentally turning it off during operation. • Slide the switch assembly to a convenient position, leaving ample clearance for the handwheel. Tighten securely with a screwdriver. • Attach the front rail end caps and screws with a phillips screw driver. See Figure 11. FRONTRAIL \ P TABLE EXTENSION SWITCHSCREW SWITCH ASSEMBLY Fig. 10 ENDCAP SCREW Fig. 11 ALIGNING THE RIP FENCE AND FRONT RAIL The rip fence scale indicator is ins

315.228390 Save this manual future reference for • Safety • Features _, CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product. Customer Help Line: 1-800-932-3188 • Assembly • Operation • Maintenance • Parts List Sears, Roebuck and Co., Hoffman Estates, IL 60179 Visit the Craftsman web page: USA 972000-780 10-02 FULL ONE YEAR WARRANTY ON CRAFTSMAN TABLE SAW If this rRRFTSMRN Table Saw fails due to a defeat in material or workmanship within one year

SCALE FRONTRAIL HEIGHT HANDWHEEL SQUAREHEAD RAILSLOT HEXNUT SWITCHSLOT Fig. 7 TABLETOP VIEWEDFROMABOVE TABLE SAWTABLE EXTENSION SCALE \. FRONTRAIL 7-1/8 in, MARKRIGHTSCALE Fig. 8 HEXNUT FLATWASHER Fig. 6 • Insert the two remaining pan head screws into holes in the fine adjustment knob bracket. • Attach the fine adjustment knob bracket to the bottom of the fence head on the right or the left side of the fence handle. Securely tighten the two screws. BRACKET SCREWS __ Fig. 9 MOUNTING THE SWITCH •

315.220381 Save this manual for future reference. • Safety CAUTION: Read and follow all • Features Safety Rules and Operating • Assembly Instructions before first use of this product. • Operation • Maintenance Customer Help Line: 1-800-932-3188 • Parts List Sears, Roebuck and Co., Hoffman Estates,lL 60179 USA Visit the Craftsman web page: ® 972000-705 10-99 FULL ONE YEAR WARRANTY ON CRAFTSMAN RADIAL ARM SAW If this CRliFT,_MAN" Radial Arm Saw fails due to a defect in material or workmanshipwithi

315.214770 _1_ WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Customer HeUp Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 BeverUy Rd., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: 983000-577 Save this manual for future reference 8-04 [] Warranty ................................................................................................................................................................

(0.004 is the thickness of a dollar bill.) Do not pinch the blade. Make sure one guide is not further away from the blade than the other. Release the guides and tighten both screws securely. • Repeat this prOcedure on the lower blade guides located under the table. See Figure 19. This band saw is designed to cut wood, wood composition prOducts, plastic, and nonferrous metals (aluminum, brass, copper). _1_ CAUTION: Do not cut ferrous metals (steel, iron) or hardened steel or serious damage to the

May beusedinconjunctionwithothersymbolsorpictographs. A DANGER: Failure to obey a safety waming will result in serious injury to yourself or to others. Always follow the safety precautions to reduce the riskof fire, electric shock and personal injury. & WARNING: Failure to obey a safety waming can result in serious injuryto yourself or to others. Always follow the safety precautions to reduce the riskof fire, electdc shock and personal injury, & CAUTION: Failure to obey a safety waming may resul