Dann wird der Knopt fur die Geschwindigkeitsregelung zur Einstellung der gewunschten Arbeitsgeschwindigkeit des Sageblattes eingestellt. ANMERKUNG Der Einstellknopf fur die Geschwindigkeit hat etwa 3 Umdrehungen. Zum Ausschalten wird der Druckerschalter erneut gezogen, so da. der Arretierknopf freigegeben wird, und dann wird der Druckerschalter losgelassen. SCHNEIDEN ACHTUNG . Beim Sagen mu. der Sagetisch fest auf der Oberflache des Werkstucks auf liegen und das Sageblatt im rechten Winkel gehal

(Fig. 8, Fig. 9) (4) Pull the holder sleeve back slightly in the direction of the arrow mark shown in Fig. 10 (in the direction opposite to the arrow marked on the holder sleeve). When you do this, the spring force will return the holder sleeve to the correct position automatically. There is no need to fasten the holder sleeve at this time. (Fig. 10) (5) Pull the back of the saw blade two or three times by hand and check that the blade is securely mounted. When pulling the blade, you will know i

4. Use right tool. Don’t force small tool or attachment to do the job of a heavy-duty tool. Don’t use tool for purpose not intended —for example— don’t use circular saw for cutting tree limbs or logs. 5. Never use a power tool for applications other than those specified. Never use a power tool for applications other than those specified in the Instruction Manual. 6. Handle tool correctly. Operate the tool according to the instructions provided herein. Do not drop or throw the tool. Never allow t

At this time, make certain that there exists no clearance between the blade holder and the rubber cap, and furthermore ensure that the saw-blade-installed area can function smoothly. CAUTION: Do not use any saw blade with a worn-out blade hole. Otherwise, the saw blade can come off, resulting in personal injury. (Fig. 18) 3. Adjusting the base Loosen the set screw with an Allen wrench and move the base forward, as shown in Fig. 19, Fig. 20. Tighten the set screw slightly, ensure the base does no

A rechargeable battery will be hot immediately after use. If such a battery is recharged immediately after use, its internal chemical substance will deteriorate, and the battery life will be shortened. Leave the battery and recharge it after it has cooled for a while. CAUTION: . When the battery charger has been continuosly used, the battery charger will heated, thus constituting the cause of the failures. Once the charging has been completed, give 15 minutes rest until the next charging. . If t

There is no need to fasten the holder sleeve at this time. (Fig. 6) (5) Pull the back of the saw blade two or three times by hand and check that the blade is securely mounted. When pulling the blade, you will know it is properly mounted if it clicks and the holder sleeve moves slightly. (Fig. 7) CAUTION: When pulling the saw blade, be absolutely sure to pull it from the back. Pulling other parts of the blade will result in an injury. 7. Dismounting the blade (1) Turn on and off the switching tri