Underwriters Laboratories. This symbol This symbol designates that designatesThis symbol designates this tool is listed by that that this tool is listed by Underwriters Laboratories, this tool the Canadian Standards and listed to Canadian compliesAssociation. Standards by Underwriters to NOM Laboratories. Mexican Standards. This symbol designates that this tool is listed by Intertek Testing Services. -5 BM 2610956795 12-07 12/12/07 1:27 PM Page 6 Functional Description and Specifications !WARNIN

The blade may be inserted with the teeth facing down or up. 3. To remove the blade, rotate the locking collar counter-clockwise and the blade will automatically eject from the LockJaw™ blade holder and lock the collar in the open position. !WARNING Make sure that the front end of the blade extends through the footplate for the entire stroke length. Do not use specialty blades that are very short or those with a significant cant. Blade must not contact footplate. A blade which is too short or can

Do not use specialty blades that are very short or those with a significant cant. Blade must not contact footplate. A blade which is too short or canted could jam inside the foot and snap. FIG. 3FIG. 2 Open Position LockJaw™ BLADE HOLDER LOCKING COLLAR BLADE LOCKING COLLAR -7 or into walls. To adjust the footplate position, simply push the footplate release button and move the footplate into the desired position. The locking mechanism is spring-loaded to lock into one of the 3 positions on the F

Dezember 2002 7:52 07 mikosoft praha s.r.o. mikosoft praha s.r.o. mikosoft praha s.r.o. mikosoft praha s.r.o. 2 • 2 610 392 415 • 02.12 3 4 5 7 8 9 10 12 13 5 14 2 11 6 15 16 1 PKS 46 1 2 3 4 18 6 7 8 9 14 5 13 12 15 16 11 17 10 PKS 40 2 610 392 415 - Buch Seite 2 Dienstag, 10. Dezember 2002 7:52 07 mikosoft praha s.r.o. mikosoft praha s.r.o. mikosoft praha s.r.o. mikosoft praha s.r.o. 3 • 2 610 392 415 • 02.12 A 21 22 8 19 20 16 15 B 24 23 25 26 2 610 392 415 - Buch Seite 3 Dienstag, 10. Dezemb

Fur ma.genauen Schnitt die Sage so ansetzen, wie in Abbildungen gezeigt. Hinweis: Am besten Probeschnitt durchfuhren. A A 2 610 392 415 - Buch Seite 4 Dienstag, 10. Dezember 2002 7:52 07 n Vor allen Arbeiten am Gerat Netzstecker ziehen. n Schutzhandschuhe tragen. n Die verwendeten Sageblatter mussen den in dieser Bedienungsanleitung angegebe- nen Kenndaten entsprechen. n Nur Sageblatter verwenden, deren zulas- sige Drehzahl mindestens so hoch ist wie die Leerlaufdrehzahl des Gerates. Zum Anziehe

PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE. 9100040003006 HAP70607EM1 Printed In China Owner’s Guide HAP706 True HEPA Allergen Remover PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS OPERATING INSTRUCTIONS IMPORTANT: • Remove all plastic bags from filters before use. • DO NOT POINT FILTERED AIR OUTLET TOWARDS WALL. To operate your air cleaner: 1. Plug into a 120V AC electrical outlet. 2. Select the operating speed of HIGH ( ), MEDIUM ( ) or LOW ( )

To increase switch life, do not turn switch on and off while cutting. GENERAL CUTS Always hold the saw handle with one hand and the auxiliary handle or housing with the other. !WARNING Always be sure either hand does not interfere with the free movement of the lower guard. Maintain a firm grip and operate the switch with a decisive action. Never force the saw. Use light and continuous pressure. !WARNING After completing a cut and the trigger has been released, be aware of the necessary time it t

United States and Canadian Standards. This symbol designates that this tool is listed by the Intertek Testing Services, to United States and Canadian Standards. This symbol designates that this tool complies to NOM Mexican Standards. -8 BM 2610001787 07-08 7/24/08 10:42 AM Page 9 Functional Description and Specifications !WARNING Disconnect battery pack from tool before making any assembly, adjustments or changing accessories. Such preventive safety measures reduce the risk of starting the tool

To attach, hook overshoe over front of metal footplate and snap into place at rear of footplate (Fig. 3). ANTI-SPLINTER INSERT To minimize splintering of the top surface of the material being cut, place the anti-splinter insert in the blade opening of the footplate, or the non-marring overshoe. Note: This insert will only work with blades that have ground sides such as T301CD, FOOTPLATE ANTI-SPLINTER INSERT NON-MARRING OVERSHOE FIG. 3 TB1B, T101D, and T101DP. Operating Instructions BLADE INSTALL