Stimmen - 2, Durchschnittliche Bewertung: 5 ( )

Hersteller: Regency Dateigröße: 598.98 kb Dateiname: Unterrichtssprache:

If this occurs, it is preferable to contact your nearest dealer to service the appliance. Alternatively, at least annually, the glass enclosure panel should be removed and the inside of the firebox and the control compartments cleaned using a vacuum cleaner to remove dust. Remove the top and bottom logs, gently handling by holding each log at each end and set on a piece of paper or cloth to avoid getting any debris on carpet or floor. Use the vacuum cleaner to remove the embers from the base and walls of the firebox and from around the burners. More frequent cleaning may be required due to excessive lint from carpeting material, etc. It is important that control compartments, burners and circulating air passageways of the heater be kept clean. Replace the logs as detailed in Step 9 Log Assembly. Place Rockwool on screen of front burner. CAUTION: REPLACE THE GLASS ENCLOSURE PANEL BEFORE USING THE APPLIANCE (REFER TO STEP 11). IMPORTANT SAFEGUARDS Even though your CF appliance gives a very realistic appearance of a wood-burning fire, it must not be used for burning wood or other similar materials. To avoid damage to the appliance or possible personal injury, matches, paper, garbage or any other material must not be placed or thrown on top of the logs or into the flames. Always ensure that the appliance glass enclosure panel is firmly fixed in place. Do not remove the glass enclosure panel during normal operation of the appliance. To avoid personal injury, do not touch hot surfaces when the appliance is operating. Close supervision of children is necessary when the appliance is in use. SPECIAL WARNINGS Do not open the louvered control compartment access panel from the middle when unit is hot. Only the ends of the louvers are cool to the touch. The glowing logs are manufactured from bonded ceramic fiber which is commonly used material in the heating industry worldwide. Intentional misuse or deliberately fragmenting the material could be hazardous to health by inhaling. These CF appliances are intended for use as a gas heater as described in these instructions and should not be used for any other purpose. Repair and work involving replacing parts should only be carried out by a qualified service person. Always shut off the gas supply and allow the appliance to cool before beginning any service work. Always check for gas leaks after servicing. If any major repair or service is required, the qualified service person must contact the SFC, INC. service department before proceeding. REPLACEMENT PARTS Exploded views of the appliances with numbered parts and parts lists can be found on pages 18 and 19. All parts should be ordered through your SFC distributor or dealer. Parts will be shipped at prevailing prices at time of order. When ordering repair parts, always give the following information: 1. The model number of the appliance. 2. The serial number of the appliance. 3. The part number. 4. The description of the part. 5. The quantity required. 6. The installation date of the appliance. If you encounter any problems or have any questions concerning the installation of this system, please contact your distributor. For the name of your nearest distributor contact: SFC 1110 West Taft Avenue Orange, CA 92865 14 NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. ACCESSORIES AND COMPONENTS Forced Air Kit FAB-1100 Remote Control Kit RCK Rocker Switch Kit RS VF5-BRLK Brass Louver Kits VF6-BRLK 1-Piece Decorative DAT-5000-1 Arch Frame Kit DAT-6000-1 SPK-5000 Screen Panel Kits SPK-6000 Wall Switch Kit WSK Gas Flex Line Kit GFLV Decorative Volcanic Stone DVS VF5-PBH Brass Hood Kit VF6-PBH Brass Square BSK-5 Surround Kits...

Herunterladen

Geben Sie zwei Ziffern: