Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Stovax Dateigröße: 2.16 mb Dateiname: Unterrichtssprache:

4 2 Step 4 Figure 9 SUPERIORSUPERIORDIRECT-VENT GAS FIREPLACES • MODELS SLDVT-30/35/40/45 • CARE AND OPERATION INSTRUCTIONS SLDVT-40 LOG PLACEMENT 4 5 32 1 Log Number Description 1 Ember Chunk 2 Left Front Log 3 Right Front Log 4 Left Rear Log 5 Right Rear Log Catalog Number for the entire log set: H7245 Left Rear Place Ember Chunk Here Right Rear Bracket Bracket Left Front Brackets Right Front Brackets (Do Not Place Rockwool Over Burner Slots) Rockwool 4 2 Right Front Log "Nub" 3 Position on the left rear log bracket Step 1 Step 3 Step 2 Align hole at the bottom of left front log (2) over the left front brackets and the right front log over the right front brackets. 32 1 Align the hole at the bottom of log (5) over the "Nub" of log (3) as shown. 3 5 Step 4 Figure 10 15 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. SUPERIOR® DIRECT-VENTGASFIREPLACES•MODELSSLDVT-30/35/40/45•CAREANDOPERATIONINSTRUCTIONSSLDVT-45 LOG PLACEMENT Step 2 Step 3Step 1 Step 4 Figure 11 Log Number Description 1 Left Front Log 2 Right Front Log 3 Center Log 4 Left Rear Log 5 Right Rear Log Catalog Number for the entire log set: H7547 Rest the bottom of log (5) over the "Groove" of log (3) as shown. Align holes at the bottom of left front log (1) over the left front brackets and the right front log (2) over the right front brackets. 5 21 34 5 Left Rear Brackets Right Rear Bracket Right Front BracketsLeft Front Brackets Center Rear Bracket Rockwool (Do Not Place Rockwool Over Burner Slots) 21 3 1 Center Log "Groove" 2 Align holes at the bottom of center log (3) over the center and right rear brackets. 3 4 Align holes at the bottom of left rear log (4) over the left rear brackets. SUPERIORSUPERIORDIRECT-VENT GAS FIREPLACES • MODELS SLDVT-30/35/40/45 • CARE AND OPERATION INSTRUCTIONS BURNER ADJUSTMENTS (QUALIFIED TECHNICIANS ONLY) Flame Appearance and sooting Proper flame appearance is a flame which is blue at the base and becomes yellowish-orange in the body of the flame. When the appliance is first lit, the entire flame may be blue and will gradually turn yellowish-orange during the first 15 minutes of operation. If after a short period the flame stays lowered blue, or if the flame is orange with evidence of sooting (black tip), the air shutter opening may need to be adjusted. If theair shutter openingsclosedtoo far, sooting maydevelop. Sootingisindicatedbyblackpuffs developingatthetipsofverylongorangeflames. Sooting results in black deposits forming on the logs, appliance inside surfaces and on exterior surfaces adjacent to the vent termination. Sooting is caused by incomplete combustion in the flames and lack of combustion air entering the air shutter opening. To achieve a warm yellowish-orange flame with an orange body that does not soot, the shutter opening must be adjusted between these two extremes. Air Shutter Adjustment Guidelines • If there is smoke or soot present, first check the log set positioning to ensure that the flames are not impinging on any of the logs. ...

Herunterladen

Geben Sie zwei Ziffern: