Stimmen - 4, Durchschnittliche Bewertung: 4.8
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
The access codes (except PUK and PUK2 codes) can be changed by using the Change codes feature (Menu #.5.5). PIN code (4 to 8 digits) The PIN (Personal Identification Number) code protects your SIM card against unauthorised use. The PIN code is card. W set to O PIN cod switche request connec without PIN2 The PIN functio SIM car Charge functio suppor Check w further PUK c The PU required phone. with the service lose the service KP235_PorEng(OPEN)_080516 2008.5.16 12:54 PM Page 17 KP235_PorEng(OPEN)_080516 2008.5.16 12:54 PM Page 17 nstall a code is usually supplied with the SIM card. When the PIN code request is set to On, your phone will request the PIN code every time the phone is switched on. When the PIN code is request is set to Off, your phone connects to the network directly he PIN without the PIN code. need PIN2 code (4 to 8 digits) The PIN2 code, supplied with some SIM cards, is required to access conds functions such as Advice of Call ff. Charge and Fixed dial number. These functions are only available if supported by your service provider. Check with your service provider for further information. d . The PUK code (4 to 8 digits) PUK2 the The PUK (PIN Unblocking Key) code is #.5.5). required to unlock a PIN blocked phone. The PUK code may be supplied with the SIM card. If not, contact your service provider for the code. If you lose the code, also contact your M card service provider. IN PUK2 code (4 to 8 digits) The PUK2 code, supplied with some SIM cards, is required to unlock a blocked PIN2 code. If you lose the code, please contact your service provider. Security code (4 to 8 digits) The security code protects the unauthorised use of your phone. The default security code is set to ‘0000’ and the security code is required to delete all phone entries and to activate the Reset settings menu. Also, the security code is required to enable or disable the phone lock function to prevent unauthorised use of the phone. The security code default setting can be modified from the Security settings menu. Barring password The barring password is required when you use the Call barring function. You can obtain the password from your service provider when you subscribe to this function. 17 Getting started KP235_PorEng(OPEN)_080516 2008.5.16 12:54 PM Page 18 KP235_PorEng(OPEN)_080516 2008.5.16 12:54 PM Page 18 General functions General functions Making and answeringcalls Making a call 1. Make sure your phone is switched on. 2. Enter a phone number, including the area code. ] To delete numbers press key. Press and hold the key to erase the entire number. 3. Press to call the number. 4. To end the call, press or the right soft key. Making a call from the call history list 1. In standby mode, press and the latest incoming, outgoing and missed calls will be displayed. 2. Select the desired number by using the up/down navigation keys. 3. Press to call the number. Making an international call 1. Press and hold key for the international prefix. The ‘+’ character automatically selects the international access code. 2. Enter the country code, area code, and the phone number. 3. Press to call the number. Ending a call When you have finished your call, press key. Making a call from the contacts list You can save the names and phone numbers dialled regularly in the SIM card and/or phone memory. You can dial a number by simply looking up the desired name in the contacts and pressing key. Adjust If you w volume ( ). Pr and do volume Note ] In sta pressi tone v Answe When y rings an appear be iden number contact 1. To an the p (Whe as th (See 18 KP235_PorEng(OPEN)_080516 2008.5.16 12:54 PM Page 19 KP235_PorEng(OPEN)_080516 2008.5.16 12:54 PM Page 19 all he s the code, l, ntacts one SIM u can up the d Adjusting the volume If you want to adjust the earpiece volume during a call, use the side keys ( ). Press the up side key to increase and down side key to decrease the volume. Note ] In standby mode with the phone open, pressing the side keys adjusts the key tone volume. Answering a call When you receive a call, the phone rings and the flashing phone icon appears on the screen. If the caller can be identified, the caller’s phone number (or name/photo if saved in the contacts) is displayed. 1. To answer an incoming call, open the phone and press the send key. (When Send key only has been set as the answer mode. (See page 58(Menu #.4.2).) Note ] If Any keyhas been set as the answer mode (see page 58), any key press will answer a call except for the or the right soft key. ] To reject an incoming call, press and hold one of the side keys on the left side of the phone without opening the phone. ] You can answer a call whilst using the phonebook or other menu features. 2. To end the call, close the phone or press the key. Signal strength You can check the strength of your signal by the signal indicator ( ) on the display. Signal strength can vary, particularly inside buildings. Moving near to a window may improve reception. General functi...