Setup procedure 1 Set up the TCP/IP and the HTTP Network Service to enable TopAccess. You should set the TCP/IP and HTTP Network Service from the control panel the first time you use it, to make TopAccess available. • Setup Guide for Printing Functions 5 CONFIGURING NETWORKS (EQUIPMENT) • TCP/IP Configuration • HTTP Configuration 10 TopAccess ADMINISTRATION TAB PAGE - SETUP MENU (Printing Function) Setting up Network Settings (Printing Function) • Setting up the TCP/IP • Setting up the HTTP netw

For further instructions, refer to CHAPTER 4 Faxing from Windows Applications Send Properties The Send Properties page enables you to select fax recipients, contacts and groups, from the Address Book. The Address Book list control allows users to navigate through the address book hierarchy, and access the properties of a selected item. The Send page is divided into two panes. The left pane contains the Groups. The right pane displays the members of the selected group or if the Toshiba e-STUDIO28

2 If you hear a tone (Fax signal), press the [FAX] button on the control panel. 3 Press the [ADVANCED] button to enter the advanced menu, and then press the [MANUAL RECEIVE] button. 4 Make sure that “OFF HOOK RECEIVE” appears, press the [START] button and replace the handset. Reception Settings 61 3 RECEIVING A FAX 3 RECEIVING A FAX Relationship between Original and Paper Acceptable size of paper Originals received by Fax can be printed on LD, LG, LT, ST, A3, B4, A4, B5 and A5 size paper, and ar

Then, ask him/her to operate their equipment for receiving a Fax. 51 6.Sending Originals (Cont.) Off-hook transmission This mode is available by picking up the handset of the external telephone to dial. When the other party receives the call as a telephone call, you can talk with him/her. This operation is available when the Line 1 lamp is OFF. 2• • An external telephone is required (not available for the European version). • You can specify the remote Fax only using the external telephone. 1 Pl

114 2. EDGE ERASE....................................................................................................................120 3. BOOK CENTER ERASE....................................................................................................121 4. DUAL PAGE.......................................................................................................................123 5. 2IN1 / 4IN1..........................................................................................

Duplex Copying....................................................................................................................97 5. Original Mode.....................................................................................................................106 6. Copy Density Adjustment...................................................................................................107 3 71 1. Paper Selection Automatic Paper Selection (APS) When you place standard size originals on the

SETTING NETWORK FUNCTIONS .................................................................................. 111 • Setting the TCP/IP Protocol (IPv4).................................................................................................. 111 • Setting the IPv6 Protocol.................................................................................................................116 • Setting the IPX/SPX Protocol..........................................................................

• The clear confirmation screen is displayed. If the touch panel does not display the department code that you want to clear the counter, press the [Next] button to display the next screen. 62 2.MANAGING COUNTERS (COUNTER MENU) 3 Press the [YES] button to clear the counter of the department code, or [NO] button to cancel clearing the counter. 2 • When you press the [YES] button, the counter of the department code is cleared. 63 4.MANAGING DEPARTMENT CODE (Cont.) Setting Output Limitations for Al

1. Place the original(s). 2. Press the FAX button on the control panel. 3. Press the ADDRESS button to enter the address menu, then Press the GROUP button. Each screen displays 8 destinations. To view destinations not displayed on the screen, press the Prev or Next button to switch the screens. 4. Press the remote Fax group to send originals. If you want to see the specified group members, press the CONTENTS button. You can search for groups by ID number and by group. TIP: The Remote Faxes in th

• P.43 "Setting up the Sender Information Properties" 6) Recipient Information Check this to have recipient information appear on the cover sheet. Select one or more of the following options to determine what information will appear in the “To:” field of the cover sheet. • Name — Check this to have the recipient name appear on the cover sheet. • Company — Check this to have the recipient company name appear on the cover sheet. • Department Name — Check this to have the recipient department name