Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Toshiba Dateigröße: 4.63 mb Dateiname: estudio_520_600_720_850.pdf Unterrichtssprache:

Duplex Copying....................................................................................................................97 5. Original Mode.....................................................................................................................106 6. Copy Density Adjustment...................................................................................................107 3 71 1. Paper Selection Automatic Paper Selection (APS) When you place standard size originals on the original glass or the Reversing Automatic Document Feeder, the size of the originals is automatically detected, which helps the equipment select paper that is the same size as the originals. • The automatic paper selection may not work correctly depending on the type of the originals. In that case, select the paper size manually.(.. P.74 “Manual paper selection”) • For original sizes available for automatic paper selection, see .. P.51 “Originals sizes and types”. 3 1 Place paper in the drawer(s). 2 Place the original(s). 3 Confirm that automatic paper selection has been selected on the basic menu. • Automatic paper selection is selected by default at the installation of the equipment. • If “Change direction of original” or “CHANGE DRAWER TO CORRECT PAPER SIZE” appears, perform the action accordingly. • Set other copy modes as required. Even if the direction of the paper set in the selected drawer differs from that of the original, the equipment rotates the data of the original by 90 degrees to make copies as long as their sizes are the same. (This works on LT paper only.) For example, when an LT original is set vertically and LT-R paper is placed in the drawer, the data of LT original will be rotated and copied correctly on LT-R paper. When automatic paper selection is not selected (1) Press the Enlargement/Reduction ([ZOOM...]) button. 72 3.SETTING OF BASIC COPY MODES (2) Press the [APS] button. 3 4 Press the [START] button. 73 1.Paper Selection (Cont.) Manual paper selection Automatic paper selection cannot be selected for the following originals because their sizes are not detected correctly. Select the paper size manually for these originals. • Highly transparent originals (e.g. OHP film, tracing paper) • Wholly dark originals or originals with dark borders • Non-standard size originals (e.g. newspapers, magazines) 3When the desired size of paper is not set in any of the drawers, place this size of paper in the selected drawer or place the paper on the bypass tray manually. (.. P.37 “Placing paper in the drawer”, .. P.63 “Bypass copying”) 1 Place paper in the drawer(s). • When using the bypass tray, be sure to specify the paper size. 2 Place the original(s). 3 Press the drawer button representing the desired paper size on the touch panel. • You can use the paper source selection ( / ) buttons to select the desired drawer. • Set other copy modes as required. 4 Press the [START] button. 74 3.SETTING OF BASIC COPY MODES When copying mixed-size originals in one go You can copy a set of originals whose sizes are individually different, using the Reversing Automatic Document Feeder, by pressing the [MIXED ORIGINAL SIZE] button. • This mixed original size setting is available only in the following combinations. LD, LG, LT, LT-R, 8.5", SQ, COMP • Note that the copied image may be dislocated depending on the combination. 1 Place paper in the drawer(s). • Bypass copying is not available. 2 Adjust the side guides to the widest original, and then align the original against the guide at the front side. • Place the originals face up. 3 3 Press the Enlargement/Reduction ([ZOOM...]) button to enter the setting menu of the original or paper size. 4 Press the [MIXED ORIGINAL SIZES] button. 75 1.Paper Selection (Cont.) 5 Select either automatic paper selection (APS) or automatic magnification selection (AMS). Automatic paper selection: Copies on the same size of paper as that of originals (.. P.72). Automatic magnification selection: Copies all in one size (.. P.77). 3 • Before you use automatic paper selection, be sure that all paper sizes corresponding to the original sizes have been set in the drawers. • In automatic magnification selection, the copies cannot be enlarged from LT (portrait) to LD (landscape)/LG (landscape). • Set other copy modes as required. 6 Press the [START] button. 76 3.SETTING OF BASIC COPY MODES 2. Enlargement and Reduction Copying You can enlarge or reduce the size of copies by means of the following procedures. • Specifying the copy paper size in advance so that the equipment will detect the original size and automatically select the most appropriate reproduction ratio for the copy paper size (= automatic magnification selection) • Specifying both original size and copy paper size separately • Using the zoom buttons or the one-touch zoom buttons The enlargement/reduction ratio available differs depending on whether the originals have been set on the original glass or on the Reversing Automatic Document...

Herunterladen

Geben Sie zwei Ziffern: