Stimmen - 4, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Toshiba Dateigröße: 1.41 mb Dateiname: gd1210-faxops-v02.pdf Unterrichtssprache:

2 If you hear a tone (Fax signal), press the [FAX] button on the control panel. 3 Press the [ADVANCED] button to enter the advanced menu, and then press the [MANUAL RECEIVE] button. 4 Make sure that “OFF HOOK RECEIVE” appears, press the [START] button and replace the handset. Reception Settings 61 3 RECEIVING A FAX 3 RECEIVING A FAX Relationship between Original and Paper Acceptable size of paper Originals received by Fax can be printed on LD, LG, LT, ST, A3, B4, A4, B5 and A5 size paper, and are printed in the printing range of each size of paper. No printing will occur in the margins borders of the received originals as indicated by the gray borders on the figures below. Set the paper in the drawers, the Large Capacity Feeder (optional) or Paper Feed Pedestal (optional). The paper set on the bypass tray is not available. Drawers can be set for Fax only. See the [Operator's Manual for Basic Function]. • If a specified drawer is set for Fax as a drawer by type, only the paper set in this drawer is used when the equipment receives a Fax. • The paper that can be set in the drawer for Fax is LD, LG, LT, LT-R, A3, A4, A4-R and B4 sizes. * If you want to set ST-R, A5-R, B5 or B5-R size paper in the drawer for Fax, ask your service technician. 5 mm 5 mm 4 mm 5 mm 5 mm 4 mm 5 mm 5 mm Setting RX printing during default setup The received data are printed on paper which fits the incoming original size. • When the incoming original is shorter or the same length as the paper printing area, it is printed in the original size. • When the incoming original is larger than the paper printing area, it is printed according to the following priority: (Initial setting: Discard printing ON, Reduction printing ON) To change the configuration to OFF, see .. P.168 “Setting RX Printing”. 1. When originals are up to 10 mm larger than the printing area; the part of the originals that exceeds the paper printing area is discarded. 2. When originals are at least 10 mm larger than the printing area; If the original can fit on a single sheet of paper by reducing it to 90%* of its original size, it is reduced and printed on a sheet of paper (Reduction printing). If the original cannot fit on a single sheet of paper, it is printed on 2 sheets of paper. * LG size originals are reduced to 75% to fit onto LT or LT-R paper. 3. Originals are printed on larger size paper. 62 Relationship between Original and Paper Paper priority when there is no same size paper When RX reduction printing and discard printing are set to “ON”, paper is selected according to the following priority: 1. Paper of the same size and same orientation as the received original 2. Paper of the same size but with a different orientation to the received original 3. Paper of the same orientation but larger than the received original • American Size Size of Original being Received Priority Ledger Legal Letter Letter Statement COMP 1. Ledger Legal Letter Letter Statement COMP 2. Letter Reduced to 75% Letter Letter Letter Ledger 3. Letter Reduced to 75% Ledger Legal Letter 4. COMP Legal COMP Legal 5. Ledger COMP Ledger COMP 6. Ledger When the correct paper size is not available, the scanned original will be reduced by remote fax to fit an available size paper (such as LD to LT) in addition to printing a received document on a larger size paper. Relationship between Original and Paper 63 3 RECEIVING A FAX 3 RECEIVING A FAX • European Size Size of Original being Received Priority A3 B4 A4 A4 A5 FOLIO A3 B4 B4A4 A4 A4 A5 FOLIO A3 A3 A3 FOLIO B4 FOLIO B5 B4 A3 B5 B4 A3 A4 A4 A4 FOLIO 1. 2. 3. 4. 5. 6. 7. 8. A4 Reduced to 75% A4 Reduced to 75% The paper priority varies according to the RX reduction printing and discard printing settings. For details, contact your service technician. 64 Relationship between Original and Paper CHECKING AND CANCELING THE COMMUNICATIONS Checking Transmission Result..............................................................................66 Checking reserved transmissions .....................................................................................................66 Checking communication status (log) ...............................................................................................68 Address registration from send/receive log.......................................................................................70 Canceling Transmissions.......................................................................................72 Canceling transmissions (during scanning) ......................................................................................72 Canceling reserved memory transmissions ......................................................................................74 Canceling transmissions (during memory transmission)...................................................................75 Canceling direct transmission (during scanning) ..............................................................................76 4 CHEC...

Herunterladen

Geben Sie zwei Ziffern: