Stimmen - 5, Durchschnittliche Bewertung: 4.2 ( )

Hersteller: Canon Dateigröße: 4.63 mb Dateiname: estudio_520_600_720_850.pdf Unterrichtssprache:

5 • If there are more originals, set them in the same way. (The same operation is performed whether or not you press the [YES] button.) 5 After all originals have finished being fed, press the [FINISHED] button. 156 5.USING THE EDITING FUNCTIONS 17. TAB PAPER Tab paper copying and insertion are available. There are the following 3 modes. 1. Copying on the tab of tab paper ([COPY ON TAB]) 2. Inserting blank tab paper prior to a selected page ([BLANK TAB INSERT]) 3. Combination of copying on tab paper and inserting tab paper ([COPIED TAB INSERT]) 1 23 • Before copying on tab paper, adjust the tab width. (.. P.160) • The tab paper can be set in any one drawer and the bypass tray except Large Capacity Feeder. (The recommendation is to set in the 2nd drawer.) • Be sure to set “TAB PAPER” for the drawer for special uses. (.. P.42 “Drawer for special uses”) • Only LT/A4 can be used in this mode. 5 Preparing an original to copy on the tab of the tab paper LT/A4 originals are used. In copying on tab or copied tab insert, the image is shifted to copy the index of the original on the tab position. Original * The shift width means the distance that image should be shifted when copied on the tab paper. Shift width*Tab width Tab paper By setting the tab width and shift width, the image is shifted to copy the index of the original on the tab position. 157 17.TAB PAPER (Cont.) Setting tab paper in the drawer The setting order is different between when the tab paper is set in the drawer and when it is set on the bypass tray. 1 Pull out the drawer. • Placing paper in the second drawer is recommended. 2 Insert the tab paper back guide into the slit of LT-TAB (or A4-TAB). 5 3 Align the tab paper with the original. Originals Sheets of tab paper front side 2nd 4th 3rd 4 Place the tab paper with its face down in the drawer. 1st 2nd 3rd 4th 1st 1st 2nd 3rd 4th back side 5 Close the drawer. • Check if the drawer for special uses is “TAB PAPER”. 158 5.USING THE EDITING FUNCTIONS Setting tab paper on the bypass tray The setting order is different between when the tab paper is set in the drawer and when it is set on the bypass tray. 1 Align the tab paper with the original. Originals Sheets of tab paper 1st 1st 2nd 3rd 4th 2 Place the tab paper with its face up on the bypass tray. front side 2nd 3rd 4th 5 front side 3 Set the size and thickness. • Be sure to select “TAB PAPER” for the paper type. (.. P.63 “6.Bypass Copying”) 159 17.TAB PAPER (Cont.) Setting the tab width To copy on tab paper, adjust both the tab width and the shift width for the drawer and the bypass tray respectively. This setting is different between when the tab paper is set in the drawer and when it is set on the bypass tray. 1 Press the [EDIT] button to enter the edit menu, and then press the [TAB PAPER] button. 5 2 Press the [TAB EXTENSION] button. 3 Press the [CASSETTE] button for setting tab paper in the drawer or the [BYPASS FEED] button for setting it on the bypass tray. 160 5.USING THE EDITING FUNCTIONS 4 Adjust the tab width and the shift width using the [0 mm] or [30 mm] button, and then press the [ENTER] button. • Press [TAB EXTENSION] or [SHIFT MARGIN] to switch the item to be set. • The initial value is set to 13 mm (0.5") for both the tab width and the shift width. • The default setting value can be changed for both the tab width and the shift width. For details, refer to the User Functions Guide. Range of the tab width and shift width The range of the tab width and the shift width is different between when the tab paper is set in the drawer and when it is set on the bypass tray. Tab width Shift width Drawer 12 to 17 mm (0.4" to 0.6") 0 to 30 mm (0 to 1.1") Bypasstray 10 to 20 mm (0.4" to 0.7") 0 to 30mm (0 to 1.1") 5 Measuring the tab width and shift width The tab width and the shift width can be measured by the scale on the left side and rear side of the original glass. The marks of the original scale have a 2 mm (0.08") pitch. • Measuring the tab width Place tab paper on the original glass to measure the tab width. Original scale Align the tab paper with the original scale Tab width • Measuring the shift width Place the original on the original glass to measure the shift width. Original scale Align the original with the original scale Shift width 161 17.TAB PAPER (Cont.) Tab paper copying The original is copied on the tab of the tab paper. 1 Prepare the original to copy on the tab of the tab paper. .. P.157 “Preparing an original to copy on the tab of the tab paper” 2 Place tab paper in the drawer or on the bypass tray. • For placing tab paper in the drawer, see .. P.158 “Setting tab paper in the drawer”. • For placing tab paper on the bypass tray, see .. P.159 “Setting tab paper on the bypass tray”. 3 Place the original(s). 4 Press the [EDIT] button to enter the edit menu, and then press the [TAB PAPER] button. 5 • If the desired function button is not displayed, press the [Prev] or [Next] button to switch the menu. 5 Press the [COPY ON TAB] button...

Herunterladen

Geben Sie zwei Ziffern: