Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Panasonic Dateigröße: 4.63 mb Dateiname: Unterrichtssprache:

Handling and storing paper Pay attention to the following points: • Avoid using paper that is specially treated or previously printed on another machine, and also avoid performing double copying on the same side of the paper, since this may cause a malfunction. • Do not use paper with creases, wrinkles or curls, paper prone to curling, smooth or tough paper; this may cause paper misfeeds. • Paper should be wrapped in its wrapping and stored in a damp-free place. • To prevent paper from being folded or bent, store it evenly on a flat surface. 36 1.BEFORE USING EQUIPMENT Setting copy paper (size change) / Setting the drawer for special uses When you set or add copy paper in the drawer, follow the procedure below. 1 Placing paper in the drawer 1 Turn the power on. 2 Pull out the drawer carefully until it comes to a stop. A: Slide rail • Be careful not to touch the slide rail of the drawer. 3 Push the lower part of the end guide in the direction of the arrow to remove it, then reinstall it at the desired paper size (indicated on the bottom inner surface on the drawer). 4 Push the arrow part (right side) of the side guide to unlock it. A 37 4.Setting Copy Paper (Cont.) 1 5 While pushing the green lever of the side guide in the direction of the arrow, set the side guide to the desired paper size. • Adjust the side guides with both hands. 6 Push the arrow part (left side) to lock the side guide. 7 Place paper in the drawer(s). • Place paper with its copy side down. (The copy side may be described on the wrapping paper.) • For the maximum number of sheets that can be set, see .. P.35 “Copy paper types and sizes”. • Fan the paper well before placing it in the drawer. • Be sure that the paper height does not exceed the line indicated inside of the guide. • Do not use creased, folded, wrinkled or damp sheets of paper. A Make sure that a gap of 0.02" (0.04" or less in total) is left between the paper and the side guide for plain paper, and approx. 0.02" to 0.04" (approx. 0.04" to 0.08" in total) for thick paper. If the gap is insufficient, it could cause paper misfeeding. 38 1.BEFORE USING EQUIPMENT 8 When the paper size is different from the one in the drawer, change the paper size indicator to match with the size of paper which has been set. 1 9 Push the drawer straight into the equipment until it comes to a stop. • Be sure to close the drawer securely and carefully. Be careful not to let your fingers be caught when closing the drawer. This could injure you. 10When the paper size is different from the one in the drawer, press the [YES] button. When the paper is the same size as the one in the drawer, press the [NO] button. • When setting the same size of paper, step 11 is not necessary. 11 Press the paper size button corresponding to the paper that has been set, and then press the [ENTER] button. 39 4.Setting Copy Paper (Cont.) Changing the setting of paper size 1 If the setting of the paper size registered in the equipment does not correspond to the one in the drawer, it could cause a paper jam. In this case, replace the paper corresponding to the setting of the paper size (• P.37 “Placing paper in the drawer”), or change the setting of the paper size according to the following procedure. 1 Press the [USER FUNCTIONS] button on the control panel. 2 Press the [USER] button on the touch panel to enter the user setting menu, then press the [GENERAL] button. 3 Press the [DRAWER] button on the touch panel. 40 1.BEFORE USING EQUIPMENT 4 Press the drawer on the touch panel corresponding to the one in which the paper size has been set, and then press the button indicating the new one. 1 41 4.Setting Copy Paper (Cont.) 1 Drawer for special uses When you set paper for special uses other than normal copying (e.g. sheets for cover copying) in the drawer, you need to set this drawer for the special use in advance. If the drawer has been set for a special use, its indication will change on the touch panel. A drawer with this setting will not be used for normal copying. The following paper types are selectable according to each purpose. Paper type Purpose Indication Reference Cover sheet Sheet used in the cover copying mode “COVER” .. P.138 “9.COVER SHEET” Insertion sheet Sheet used in the sheet insertion mode (Up to 2 drawers can be set for this mode. First, set Insert source 1, then press the drawer for the paper type of Insert source 2, and then press the [INSERT] button.) “INSERT 1” (or “INSERT 2”) .. P.141 “10.SHEET INSERTION” Tab paper Paper used for the tab paper mode “TAB PAPER” .. P.157 “17.TAB PAPER” FAX paper Paper to print data from the FAX Unit, Printer Kit, Scanner Kit, Printer/Scanner Kit when any of them is installed. F (See the manual of each option.) Special paper Special types of paper (e.g. Paper with a watermark) - Select the suitable paper type from the following according to its paper weight. Paper type Paper wight Indication Reference Thick 1 -28 lb. Bond .. P.35 “Copy paper types and sizes” Thick 2 -90 lb. ...

Herunterladen

Geben Sie zwei Ziffern: