When the remote no longer operates the player, replace all the batteries with new ones. Notes • Do not leave the remote near an extremely hot or humid place. • Do not drop any foreign object into the remote casing, particularly when replacing the batteries. • Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction. • If you don’t use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage a

Follow Steps 1 to 4 in “Creating Your Own Program” on page 11. The A indication appears in the display. 2EWhen you record on both sides of the tape, press P to insert a pause. The “P” and AB indications appear in the display and the playing time is reset to “0.00.” When you record on one side of the tape, skip this step and go to Step 4. A pause is counted as one track You can program up to 31 tracks when you insert a pause. 3ERepeat Steps 2 to 4 in “Creating Your Own Program” on page 11 to crea

When listening with the headphones (CDP-CE505 and CDP-C450Z only) Connect the headphones to the PHONES jack on the player and adjust the volume with the PHONE LEVEL control on the player or with the LINE OUT LEVEL +/– buttons on the remote. You can adjust the output level to the amplifier (except for CDP-CE305, CDP-C250Z and CDP-C661) Press LINE OUT LEVEL +/– on the remote. You can reduce the output level up to –20EdB. When you reduce the output FADE level, appears in the display. When you turn

(For CDP-CE505 or CDPC450Z, press M. SCAN on the remote.) When you find the track you want, press · to start playing. Shuffle Play (1EDISC) (page 11) Program Play (page 11) All the tracks on the current disc in random orders The same program A point while )(forward) or 0(backward) and monitoring the sound hold down until you find the point A point quickly by )(forward) or 0(backward) and observing the display hold down until you find the point. during pause You will not hear the sound during the

IMPORTANTOn power sourcesWARNINGIf the plug supplied is not suitable for the• Before operating the player, check thatsocket outlets in your home, it should

Take off the cap and plug in the optical cable. Note that you cannot use the fade in or out (page 16) functions when using this connection. POC-15 Optical cable (not supplied) CD player Digital component DIGTAL OUT OPTICAL DIGITAL INPUT OPTICAL Note When you connect via the DIGITAL OUT (OPTICAL) connector, noise may occur when you play CD software other than music, such as a CD-ROM. If you have a Sony component with the CONTROL A1 jack Connect the component via the CONTROL A1 jack. You can simpl

Press POWER to turn on the player. Press ¤OPEN/ CLOSE, and place a disc on the disc tray. To place other discs, press DISC SKIP and place the discs in the order you want to play. Each time you press the button, the disc tray turns and you can place the discs in the empty disc compartments. The player plays the disc in front of you first.Disc numberWith the label side up Adjust the headphone volume. Connect the headphones. Press CONTINUE. Each time you press the button, “ALL DISCS” and “1EDISC” a

Storing Information About CDsStoring Information About CDs (Custom Files) (CDP-CA9ES only)(Custom Files) (CDP-CA9ES only) (Erasing Custom FilesWhat You Can Do

Note that, if the programmed track number isn’t found on the disc, that step is automatically erased. The program remains even after the Program Play ends When you press (, you can play the same program again. The program remains until you erase it If you replace discs, the programmed disc and track numbers remain. So, the player plays only the existing disc and track numbers. However, the disc and track numbers that aren’t found in the player or on the disc are deleted from the program, and the