Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Sony Dateigröße: 567.84 kb Dateiname: 3810585231.pdf Unterrichtssprache:

When the remote no longer operates the player, replace all the batteries with new ones. Notes • Do not leave the remote near an extremely hot or humid place. • Do not drop any foreign object into the remote casing, particularly when replacing the batteries. • Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction. • If you don’t use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. Hooking Up the System Overview This section describes how to hook up the CD player to an amplifier. Be sure to turn off the power of each component before making the connections. CD player Amplifier : Signal flow What cords will I need? Audio cord (supplied) (1) (L) Line output (R) Audio input (L) Audio input (R) To an AC outlet To an AC outlet White White (L) (L) Red Red (R) (R) 4 Getting Started Getting Started Hookups When connecting an audio cord, be sure to match the color-coded cord to the appropriate jacks on the components: Red (right) to Red and White (left) to White. Be sure to make connections firmly to avoid hum and noise. CD player Amplifier INPUT CD L R LINE OUT L R You can adjust the output level to the amplifier (except for CDP-CE305, CDP-C250Z and CDP-C661) Press LINE OUT LEVEL +/– on the remote. You can reduce the output level up to –20EdB. When you reduce the output level, FADE appears in the display. When you turn off the player, the output level automatically returns to the maximum level. Note If you press the LINE OUT LEVEL +/– buttons on the remote while recording, the recording level will change even when it is preset on the tape deck, etc. (except for CDP-CE305, CDPC250Z and CDP-C661). • If you have a digital component such as a digital amplifier, D/A converter, DAT or MD (CDP-CE505 and CDP-C450Z only) Connect the component via the DIGITAL OUT (OPTICAL) connector using the optical cable (not supplied). Take off the cap and plug in the optical cable. Note that you cannot use fading in or out (page 14) and Time Fade (page 15) functions when making this connection. POC-15 Optical cable (not supplied) CD player Digital component If you have a component with the CONTROL A1 connector (CDP-CE505 only) Connect the component via the CONTROL A1 connector. You can control the player with the connected component. For details, refer to the supplementary instructions. Connecting the AC power cord Connect the AC power cord to a wall outlet. Transporting the player Before transporting the player, follow the procedure below to return the internal mechanisms back to their original position. 1 Remove all the discs from the disc tray. 2 Press ¤OPEN/CLOSE to close the disc tray. “no DISC” appears in the display. 3 Wait for 10 seconds, then press POWER to turn off the player. DIGITAL INPUT DIGITAL OUT OPTICAL OPTICAL Note When you connect via the DIGITAL OUT (OPTICAL) connector, noise may occur when you play CD software other than music, such as a CD-ROM. Basic Operations Basic Operations Playing a CD 25 634 Adjust the headphone volume.* Connect the headphones.* · See pages 4 – 5 for the hookup information. POWER PHONE LEVEL PHONES CONTINUE SHUFFLE PROGRAM CHECK CLEAR REPEAT DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 A B C D MUSIC CLIP FILE ERASE TIME 1 2 3 4 5 6 7 8 9 10 >10 EDIT/ TIME FADE PEAK SEARCH AMS OPEN/CLOSE DISC SKIP EX-CHANGE DISC CHECK ON OFF *CDP-CE505 and CDP-C450Z only 1 1 Turn on the amplifier and select the CD player position so that you can listen to the sound from this player. 2 2 Press POWER to turn on the player. 3 3 Press ¤OPEN/CLOSE, and place a disc on the disc tray. With the label side up Disc number 4 4 To place other discs, press DISC SKIP and place the discs in the order you want to play. Each time you press the button, the disc tray turns and you can place the discs in the empty disc compartments. The player plays the disc in front of you first. 5 5 Press CONTINUE to select ALL DISCS or 1 DISC Continuous Play mode. Each time you press CONTINUE, “ALL DISCS” or “1EDISC” appears in the display. When you select The player plays ALL DISCS All discs in the player consecutively in the order of disc number 1EDISC Only the disc you’ve selected 6 Basic Operations Basic Operations You can select the disc you want to start playing first Press one of the DISC 1–5 buttons. When listening with the headphones (CDP-CE505 and CDP-C450Z only) Connect the headphones to the PHONES jack on the player and adjust the volume with the PHONE LEVEL control on the player or with the LINE OUT LEVEL +/– buttons on the remote. You can adjust the output level to the amplifier (except for CDP-CE305, CDP-C250Z and CDP-C661) Press LINE OUT LEVEL +/– on the remote. You can reduce the output level up to –20EdB. When you reduce the output FADE level, appears in the display. When you turn off the player, the output level automatically returns to the maximum level. Note If you press the LINE OUT LEVEL +/– buttons on th...

Herunterladen

Geben Sie zwei Ziffern: