Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Press POWER to turn on the player. Press ¤OPEN/ CLOSE, and place a disc on the disc tray. To place other discs, press DISC SKIP and place the discs in the order you want to play. Each time you press the button, the disc tray turns and you can place the discs in the empty disc compartments. The player plays the disc in front of you first.Disc numberWith the label side up Adjust the headphone volume. Connect the headphones. Press CONTINUE. Each time you press the button, “ALL DISCS” and “1EDISC” appear alternately in the display. When you select The player plays Press (. The disc tray closes and the player plays all the tracks once. Adjust the volume on the amplifier. To stop playback Press p. POWER 1 2 3 4 5 DISC CONTINUE SHUFFLE PROGRAM DISC SKIP OPEN/CLOSE LINE OUT PHONE LEVELPHONES ALL DISCS All discs in the player consecutively in the order of disc number 1EDISC Only the disc you’ve selected You can select a disc directly and start playing it in Step 5 Press one of the DISC 1 – 5 buttons, and the player plays the disc you’ve selected. When you want to Press Pause P Resume play after pause P or ( Go to the next track ± Go back to the preceding track . Go to the next disc DISC SKIP Select a disc directly DISC 1 – 5 Stop play and remove the CD ¤OPEN/CLOSE 4 Getting Started Getting Started Unpacking Check that you received the following items: • Audio connecting cord (1) • Remote commander (remote) (1) RM-D645 for CDP-CA9ES RM-D515 for CDP-CA8ES • Sony SUM-3 (NS) batteries (2) Inserting batteries into the remote You can control the player using the supplied remote. Insert two size AA (R6) batteries by matching the + and – on the batteries. When using the remote, point it at the remote sensor gon the player. When to replace batteries With normal use, the batteries should last for about six months. When the remote no longer operates the player, replace all the batteries with new ones. Notes • Do not leave the remote near an extremely hot or humid place. • Do not drop any foreign object into the remote casing, particularly when replacing the batteries. • Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction. • If you don’t use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. Hooking Up the System Overview This section describes how to hook up the CD player to an amplifier. Be sure to turn off the power of each component before making the connections. CD player Amplifier : Signal flow To an AC outlet Line output (R) Line output (L) To an AC outlet Audio input (R) Audio input (L) What cords will I need? Audio cord (supplied) (1) White White (L) (L) Red Red (R) (R) Hookups When connecting an audio cord, be sure to match the color-coded cord to the appropriate jacks on the components: Red (right) to Red and White (left) to White. Be sure to make connections firmly to avoid hum and noise. CD player Amplifier INPUT CD L R LINE OUT L FIXED R Getting Started • If you have an analog power amplifier Connect the amplifier via the VARIABLE LINE OUT jacks using the supplied audio cord. You can adjust the output level with the LINE OUT/PHONE LEVEL control on the player or the LINE OUT LEVEL buttons on the remote. CD player Amplifier LINE OUT L VARIABLE R INPUT CD L R • If you have a digital component such as a digital amplifier, D/A converter, DAT or MD Connect the component via the DIGITAL OUT (OPTICAL) connector using the optical cable (not supplied). Take off the cap and plug in the optical cable. Note that you cannot use fading in or out (page 13) and Level File (CDP-CA9ES only, page 17) functions when making this connection. POC-15 Optical cable (not supplied) CD player Digital component DIGITAL OUT OPTICAL DIGITAL INPUT OPTICAL Note When you connect via the DIGITAL OUT (OPTICAL) connector, noise may occur when you play CD software other than music, such as a CD-ROM. • If you have a Sony CD player, receiver or amplifier with the CONTROL S OUT connector Connect the component via the CONTROL S IN connector using the CONTROL S cable (not supplied). You can remotely control this player through the other component. CD player Other component Connecting the AC power cord Connect the AC power cord to a wall outlet. Where do I go next? Now you’re ready to use your player. If you aren’t familiar with how to play CDs, go to the section “Playing a CD” on page 4. Then, go to the following sections for other operations. Transporting the player Before transporting the player, follow the procedure below to return the internal mechanisms back to their original position. 1 Remove all the discs from the disc tray. 2 Press ¤OPEN/CLOSE to close the disc tray. “–NOEDISC–” appears in the display. 3 Wait for 10 seconds, then press POWER to turn off the player. CONTROL S IN CONTROL S OUT Playing CDs Playing CDs Display information while playing a disc Using the Display While playing a disc, the display shows the cur...
Dieses Handbuch ist für folgende Modelle:CD-Player - CDP-CA9ES (556.6 kb)