This menu comes after you have finished setting the TIME/DAY. 1. The answering system announces, “Rings to Answer ( the current rings to answer setting ) To set rings to answer, press next...press set to continue.” 2. To change the rings to answer, press and release the NEXT or PREVIOUS button and the answering system announces a number such as “2,3,4,” or “2, toll saver, 5.” 3. After choosing a number, press and release the STOP/SET button to store the rings to answer. The answering system conf

NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. A THE EXCLAMATION POINT WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF IMPORTANT INSTRUCTIONS ACCOMPANYING THE PRODUCT. SEE MARKING ON BOTTOM / BACK OF PRODUCT 5 Introduction A CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. Before You

3. Replace the battery compartment door and tighten the screw. NOTE: If the battery is low or not installed, the unit announces “Low Battery” at the end of message playback. Wall plate Modular telephone line jack Battery compartment door Battery clip -+ Battery -+ 5 INSTALLATION 3. Connect the small end of the power supply into the POWER 9V AC jack on the back of the answerer. Plug the other end into an AC power outlet. The unit beeps 3 times and is ready for setup or to answer calls with the de

When the unit receives a call, the display will light and remain lit until the calls are retrieved. This unit is supplied with 8 greetings. Six have default greetings that can be recorded over. It is recommended that you use Greeting 1 for general callers. Use Greetings 2 through 5 for custom messages. For example: Greeting 1: “Sorry I can’t take your call right now. But if you leave your name and number after the beep, I’ll get back to you as soon as I can.” Greeting 2: “Hi Mom. I’m out shoppin

The phone gives a sample ring when adjusting. Handset Volume Use the VOLUME a pt and v buttons to adjust the handset listening volume while it is in use. Speakerphone Volume Use the VOLUME a and v buttons to adjust the speakerphone listening volume while it is in use. Telephone Operation_ Using the Speakerphone Speakerphone Location For best speakerphone performance, avoid the following: • Areas with high background noise. (The microphone might pick up these sounds and prevent the speake

• When the answering system is answering a call, “A” shows in the message counter display. • When the answering system s playing messages, “ “ shows in the message counter display. • When you’re recording a memo, “L” shows in the message counter display. • When the remote functions are accessed, “A “ shows in the message counter display. • When you’re erasing all the messages, “E “ shows in the message counter display. Playing Messages When the message counter flashes you have new messages. Mess

Connect the small end of the power supply into the POWER 9V AC jack on the back of the answerer. Plug the other end into an AC power outlet. The unit plays a long beep and announces “please wait.” After the pause, the unit beeps again and is ready for setup or to answer calls with the default greeting and settings. CAUTION: Only use the ATLINKS USA, Inc. 5-2515 power supply that was packed with this unit. Using other power supplies may damage the unit. IMPORTANT INSTRUCTIONS FOR MOVING THE ANSWE

Both types of greetings are recorded by the following: 1. Prepare your greeting. Sample Single Mailbox Greeting: Hi, this is (use your name here). I can’t answer the phone right now, so please leave your name, number, and a brief message after the tone, and I’ll get back to you. Thanks for calling. Sample Multi-Mailbox Greeting: Hi, this is (use your name here). We can’t answer the phone right now, so please press 1 to direct your message to (name1), press 2 to direct your message to (name2), pr

See the remote access card attached to the cover for detailed information regarding the remote functions. Bypassing the Outgoing Announcement You can bypass the outgoing announcement by pressing a number key while the announcement is playing. Remote Access Voice Menu This system has a voice menu system to guide you through the available options when you access your answerer from a remote location. This User's Guide also includes two wallet-size remote access reference cards that you can rem