“Change call screening” When on, you can hear callers leave (Play/Stop) Options: On / Off messages, or answer the call. Press to set selection and exit menu “Change number of rings” Options: 2 / 4 / 6 /Toll Saver Choose number of rings before the system answers a call. When Toll Saver is active, the system answers after 2 rings if you have new messages, and after 4 rings if you have no new messages. NOTE: Press and hold CHANGE to advance the remote access code number by 10. 39 ATT-5865CIB-d5.qxd

To pair and connect a cellular phone: 1. Using the telephone base, ..........press the MENU softkey while in idle mode. 2. ..........Press the UP and DOWN Navkeys.............. to highlight Bluetooth, then press the SELECT softkey to enter the Bluetooth menu. 3. Press the SELECT softkey to enter the Set up Cellular menu. • If a device is already connected to the telephone base, press the OK softkey to temporarily disconnect the device(s) and continue the pairing process. 4. Press the NEXT softke

5. Press each button on the telephone and read the display. 6. Write the name of each button on the appropriate telephone button label strip. 7. Press . when finished. 8. Insert the button label strips back on the KIM and telephone. 9. Insert the plastic lens, matching the tabs on the lens with the notches on the KIM and telephone. Tip: Use the Desktop Assistant application to customize button label strips. Go to and download the Desktop Assistant application to your personal computer. 3 Monitor

2. You can only deregister handsets when the handsets and the base are not being used. 3. To re-register the handset to the telephone base follow the registration instructions on page 41. NOT REGISTERED Appendix Troubleshooting If you have difficulty with your phone, please try the suggestions below. For Customer Service, visit our web site at or call 1-800-222-3111. In Canada, call 1-866-288-4268. My phone doesn’t work at all • Make sure the power cord is securely plugged in. • Make sure that t

1 Press 0# to cancel the last address you entered in the list. 2 Repeat this step for each address you want to cancel, erasing entries one at a time from the end of the list. 3 Return to step 3 above. Addressing a messag e You can address your messages to local mailboxes and distribution lists. You may also be able to address messages to mailboxes at other sites (networks), to other voice mail systems (open networks), and to recipients at telephones with no voice mail. For the required prefixes,

AT&T and the Globe Design are trademarks of AT&T Corporation., licensed to Advanced American Telephones. STOP! See page 8 for easy instructions You must install and charge the battery before using the telephone For customer service or product information, visit our web site at or call 1-800-222-3111 Please also read Important Product Information Enclosed in product package Handset 1 Handset 2 Handset 3 Add new handsets to make your phone more versatile (see page 38) Your telephone can accommodat

touch tone phone with a different telephone number. Delete Selected Messages 2 When the system answers, enter your Press and release 3 while the message you three-digit Access Code during or want to delete is playing. after the announcement. The system announces the number of messages, Record Announcement then beeps twice. If you don’t 1 Press 7* , and begin speaking after hear the two beeps, wait for the the beep. announcement to end or press # to 2 Press 5 when you are finished. The stop the a

After FAX capability has been added to Norstar Voice Mail, you can add or customize Fax Overflow and Fax-on-demand information. For more information about customizing the FAX software, refer to the Norstar Voice Mail FAX Set Up and Operation Guide. 1. Insert the FXENABLE diskette into the floppy disk drive. 2. Plug in the module and wait for the NAM to boot from the disk. This takes approximately three minutes. 3. After all disk activity has ceased and the light on the floppy disk drive has gone

An erased message remains in your mailbox until you end your current Enterprise Edge Voice Messaging session. After you erase a new or saved message, the number of new or saved messages shown on the display decreases by one. If the display shows 0 new 0 saved, you can play and retrieve your erased messages. Press PLAY or U to listen to your erased message. After you play your erased message, you have the option to save it. If you end the current session without saving the erased message, it is p

Center Prepared by USA (800) 432-6600 AT&T Product Documentation Canada (800) 255-1242 Development Department, Denver, Colorado For more detailed information on AUDIXO features, see the AUDIXO Feature Copyright 1993 AT&T Descriptions manual (585-305-203). 585-305-715, Issue 1 November 1993 For more information about AT&T documents, see the Global Business Communications Systems Publications Catalog (555-000-010). (Outside Front Cover) (Outside Back Cover) TABLE OF CONTENTS 12 Modify a Recorded P