Stimmen - 1, Durchschnittliche Bewertung: 3 ( )

Hersteller: DeWalt Dateigröße: 436.19 kb Dateiname: ab00770a-25f0-4a6d-944e-856e1ae2a491.pdf Unterrichtssprache:

3. The completion of charge will be indicated by the red light remaining ON continuously. The pack is fully charged and may be used at this time or left in the charger. WARNING: Don't allow any liquid to get inside charger. Electric shock may result. To facilitate the cooling of the battery pack after use, avoid placing the charger or battery pack in a warm environment such as in a metal shed, or an uninsulated trailer. 3 English English CAUTION: Neverattempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks, return to a service center for recycling. Battery Packs Your tool uses a 24 Volt DEWALT battery pack. When ordering replacement battery packs, be sure to include catalog number Extended Run-Time battery packs deliver more run-time than standard battery packs. BATTERY PERFORMANCE Some chargers have a tune-up feature that optimizes battery performance. Your charger may provide Automatic Tune-Up™ Mode or manual (i.e., push button) Tune-Up™ mode. For information on this feature, please see the appropriate section below. Because batteries slowly lose their charge when they are not on the charger, the best place to keep your battery pack is on the charger at all times. USING AUTOMATIC TUNE-UP™ MODE The Automatic Tune-Up™ Mode equalizes or balances the individual cells in the battery pack allowing it to function at peak capacity. Battery packs should be tuned up after every 10th charge/ discharge cycle or whenever the pack no longer delivers the same amount of work. To use the automatic tune-up mode, simply place the battery pack in the charger and leave it for at least eight hours. The charger will cycle through the following modes. 1. The red light will blink continuously indicating that the 1-hour charge cycle has started. 2. When the 1-hour charge cycle is complete, the light will stay on continuously and will no longer blink. This indicates that the pack is fully charged and can be used at this time. 3. Whenever the pack is left in the charger after the initial 1-hour charge, the charger will begin the Automatic Tune-Up™ Mode. This mode continues up to 8 hours or until the individual cells in the battery pack are equalized. The battery pack is ready for use and can be removed at any time during the Tune-Up™ Mode. 4. Once the Automatic Tune-Up™ Mode is complete the charger will transition to a maintenance charge; no completion of the Automatic Tune-Up™ Mode. USING THE MANUAL TUNE-UP™ MODE The manual Tune-Up™ mode equalizes or balances the individual cells in the battery pack at its peak capacity. This mode takes up to 8 hours to complete. Battery packs should be tuned up 10 charge/discharge cycles or whenever the pack no the same amount of work. 1. To tune up your battery pack, place the battery in the charger usual. The red light will blink continuously indicating that the charge cycle has started. 2. Press the Tune-Up™ Mode button any time after the charge cycle has started. The red light will stop blinking momentarily, blink quickly 3 times, and then resume blinking continuously. The charger is now tuning up the cells in your battery. 3. When the Tune-Up™ mode cycle is complete, the light will stay on continuously. The pack is ...

Herunterladen

Geben Sie zwei Ziffern: