Stimmen - 4, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Casio Dateigröße: 1.9 mb Dateiname: Unterrichtssprache:

• A note does not sound when you press a keyboard key while holding down CONTROL. Power on effect settings The table below shows the effect settings that are assigned to each tone whenever you turn on CELVIANO power. Tone Name Digital Effect Setting REVERB CHORUS GRAND PIANO HALL 1 OFF MELLOW PIANO HALL 1 OFF GRAND PIANO 2 HALL 1 OFF ELEC PIANO 1 HALL 1 ON ELEC PIANO 2 HALL 1 ON HARPSICHORD HALL 1 OFF PIPE ORGAN HALL 1 OFF STRINGS HALL 1 ON • The above digital effect settings can be changed after you turn on power. .NOTE . • Selecting a tone automatically selects the digital effects currently assigned to it. • Changes you make to digital effect settings are assigned to the currently selected tone only. • Digital effect settings remain in effect until you turn off CELVIANO power. • Demo tunes have their own digital effect settings, which are automatically selected whenever you select a demo tune. More about tones Polyphony This piano can play up to 64 notes at the same time. Also note that some of the tones offer only 32-note polyphony (GRAND PIANO, MELLOW PIANO, ELEC PIANO 1, HARPSICHORD, STRINGS). Touch Response The touch response feature of this piano causes the volume of the tones and the sound of the tones themselves to change slightly in accordance with how much pressure you apply to the keyboard, just like with an acoustic piano. Touch response affects the HARPSICHORD tone only slightly, because the original musical instrument normally produces the same sound, no matter how much pressure is applied. Digitally Sampled Tones The tones of this piano are produced using digitally recorded samples of actual musical instruments. Not all of the instruments, however, can produce tones across the entire range played by this piano (A0 through C8). In such a case, digital recordings are used for the range that actually can be produced by the original instrument, and synthesized tones are used for notes that cannot be produced naturally. Because of this, you may notice very slight differences between natural notes and synthesized notes in sound quality and in results produced when using effects. These differences are normal and do not indicate malfunction. 427B-E-017B E-13 AP31/33_E_10_15.p65 Page 13 03.10.7, 11:00 AM Adobe PageMaker 6.5J/PPC Using the Pedals Damper pedal Soft/Sostenuto pedal The AP-31 is equipped with the two pedals shown in the illustration below. The left pedal normally functions as a soft pedal. The AP-33 comes equipped with the three pedals shown in the illustration below. Soft pedal Damper pedal Sostenuto pedal Pedal functions • Damper pedal Pressing this pedal causes notes to reverberate and to sustain longer. • Soft pedal Pressing this pedal dampens notes and slightly reduces their volume. Only notes played after the pedal is depressed are affected, and any notes played before the pedal is pressed sound at their normal volume. • Sostenuto pedal Like the damper pedal, this pedal causes notes to reverberate and to sustain longer. The difference between the two pedals is the timing when they are pressed. With the sostenuto pedal, you press the pedal after depressing the notes you want to sustain. Only the notes whose keyboard keys are depressed when the sostenuto pedal is pressed are affected. To assign the sostenuto to the left pedal (AP-31 only) While holding down the left pedal, turn on CELVIANO power. To return left pedal to soft pedal, turn power off and then back on again. .NOTE. • The following shows how pedal effects are applied during different types of operations. Memory playback, demo tune play ................... Pedal effects applied to notes played on the keyboard only. E-14 427B-E-018B AP31/33_E_10_15.p65 Page 14 03.10.7, 11:00 AM Adobe PageMaker 6.5J/PPC Using the Metronome The metronome provides a reference beat that you can use during your performances or practice sessions. You can change the beat and the tempo of the metronome. • The names of the settings are marked above the keyboard keys to which they are assigned. Metronome Volume Keys Beat Keys Tempo Keys B1B2C2D2E2F2G2C3D3E3 F3G3A2B 2F 2A 2F 3A 3C2 E2 C 3E 3Number Input Keys Using the Metronome . PREPARATION . • Check to make sure that the indicator above the RECORD button is off. If the indicator is on, press the RECORD button to turn it off. • See the section of this User’s Guide covering the memory for details on using the metronome in combination with the function. To use the metronome 1. Press METRONOME to start the metronome. • This starts the metronome sound. 2. Set the beat of the metronome. While holding down the CONTROL button, press the keyboard key that corresponds to the beat setting you want to select. • A note does not sound when you press a keyboard key while holding down CONTROL. • The first value of the beat can be set to a value of 2 through 6, or 0 (unaccented beat). 3. Change the tempo setting as described below. • A note does not sound when you press a keyboard key while holding down CONTROL. • Wh...

Herunterladen

Geben Sie zwei Ziffern: