3890 Steve Reynolds Blvd., Norcross, GA 30093 Tel. 770-279-5600 HITACHI SALES CORPORATION OF HAWAII, INC. 3219 Koapaka Street Honolulu, HI 96819 Tel. 808-836-3621 HITACHI (HSC) CANADA INC. 6740 Campobello Road, Mississauga, Ontario L5N 2L8 Tel. 905-821-4545 QR30211 @Hitachi, Ltd. 1998 Printed in China TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS............................................................................................................................ 2 Precautions .....

Make sure that STEREO/MONO selection is set to STEREO. When this is set, the VCR records the second audio program. Using the Instant Recording Timer (IRT) The Instant Recording Timer (RECIIRT button on the VCR) will let you make a simplified timer recording without having to use the programming timer. In order to set the IRT properly the clock must be set before starting. Follow the steps 1 through 5 on "Basic Recording Steps" on page 37. After the recording has started, press the REC/IRT button

Press either the or buttons until picture is clear. SPECIAL PLAYBACK EFFECTS Variable speed playback Still Playback (Pause) Press the PAUSE button on the remote control or PLAY/STILL on the VCR to still the tape during play. The picture will "freeze". You may see some minor noise or interference on the screen. This is normal. • To resume play, press the PLAY button or PAUSE button again. Note: The sound is muted and cannot be heard during "Special Playback Effects". Notes: • After 1 minute in th

Tape Navigation Displaying Captions Hitachi Home Electronics (America), Inc. HITACHI (HSC) CANADA INC 3890 Steve Reynolds Blvd., Norcross, GA 30093 3300 Trans Canada Highway, Pointe Claire, Tel. 770-279-5600 Quebec, H9R 1B1, CANADA Tel. 514-697-9150 HITACHI SALES CORPORATION OF HAWAII, INC 3219 Koapaka Street, Honolulu, Hawaii 96819 Tel. 808-836-3621 QR13542 © Hitachi, Ltd. 1995 Printed in Japan KG-K(N) TABLE OF CONTENTS FOR YOUR SAFETY..........................................................

• The CABLE BOX TYPE message will appear on the TV screen. Remote Control Illustration. 10 Press the two number buttons that match the code number of your cable box brand from the table below. For example, press (3) (7) for the Hitachi brand cable box. 11 Press the GUIDE button to enter you cable box brand. The VCR will change the cable box from channel 02 to channel 09 to confirm that the correct code was entered. 12 Cable box channel changed to channel 9: Press the (1) button to end this setti

10 Water and Moisture -- Do not use this video product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 11 Accessories -- Do not place this video product on an unstable card, stand, tripod, bracket or table. The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer, or

Then, press [F.FWD]. If you connected the VCR to a cable box or satellite box as in "Connect VCR to TV" on page 3, select the VCR to channel 3 or 4 the same channel as RF output channel of the VCR. Then, select the channel you want to record at the cable box or satellite box. Press [PLAY] or [STOP] repeatedly for the desired program number.Then, press [F.FWD]. First, press [PLAY] or [STOP] for the month. Then, press [F.FWD]. Next, press [PLAY] or [STOP] for the day. Then, press [F.FWD]. First, p

Matching Broadcast CH Numbers to VCR Plus+ Channels for Home Antenna or Cable (No Cable Box) Setup (Hookups [A], [B], [C] or [D].) 1 Turn on the TV and select the Video channel (3 or 4). Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO. 2 Press the GUIDE button. The main on-screen menu will appear on the TV screen. 3 Press the (4) button to select CHANNEL PRESET. 4 Press the (4) button to select VCR PLUS+ SETUP. A small arrow points to a blank "--" in the CHANNEL co

To copy from one VCR to another VCR 1 Press the AVX button on the remote control of VCR-1 so that L1 (line) appears in the display. 2 Press the REC, then PAUSE buttons on VCR-1. The VCR will go into Record/Pause. 3 Press the PLAY button on VCR-2. You will see the taped program being played on the TV. 4 When you see the part of the program you wish to record, press the PAUSE button on VCR-1 again to release pause and start recording. . Press the STOP button to finish recording. PROBLEM GUIDE / MA

• 8-program/1-year preset recording. • Auto tracking system automatically adjusts the tracking so the picture is optimized. • Frequency synthesized tuner provides easy, preset tuning of up to 68 broadcastTV channels and 125 cable channels. • VHS Hi-Fidelity sound in playback. • On-screen programming guide. Hitachi Home Electronics (America), Inc. HITACHI (HSC) CANADA INC 3890 Steve Reynolds Blvd., Norcross, GA 30093 3300 Trans Canada Highway, Pointe Claire, Tel. 770-279-5600 Quebec, H9R 1B1, CAN