Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Anleitung Zusammenfassung
Then, press [F.FWD]. If you connected the VCR to a cable box or satellite box as in "Connect VCR to TV" on page 3, select the VCR to channel 3 or 4 the same channel as RF output channel of the VCR. Then, select the channel you want to record at the cable box or satellite box. Press [PLAY] or [STOP] repeatedly for the desired program number.Then, press [F.FWD]. First, press [PLAY] or [STOP] for the month. Then, press [F.FWD]. Next, press [PLAY] or [STOP] for the day. Then, press [F.FWD]. First, press [PLAY] or [STOP] for the hour. Then, press [F.FWD]. Next, press [PLAY] or [STOP] for the minute. Then, press [F.FWD]. And then, press [PLAY] or [STOP] for AM or PM. Then, press [F.FWD]. Follow the instructions of "Set the start time" to set the end time. For weekly: Press [PLAY] or [STOP] to point to "WEEKLY". Then, press [F.FWD]. For daily (Monday~Friday): Press [PLAY] or [STOP] to point to "DAILY". PROGRAM NUMBER 4 ONCE DAILY WEEKLY CHANNEL - - REC SPEED - - For once: Press [PLAY] or [STOP] to point to "ONCE". • If there is a power failure or the VCR is unplugged for more than 30 seconds, the clock setting and all timer settings will be lost. • If the tape runs out before the end time, the VCR will switch to the Stop mode immediately, eject the tape and the VCR power will be turned off. The TIMER indicator will flash. • If a tape is not in the VCR or does not have the safety tab, the TIMER indicator flashes and timer recording cannot be performed. Please insert a recordable tape. To Stop an Automatic Timer Program already started Press [STOP/EJECT] on the VCR. To Check, Correct, or Cancel an Automatic Timer Program 1 Turn the power on by pressing [POWER]. 2 Select main menu by pressing [MENU]. 3 Select "TIMER PROGRAMMING" by pressing [PLAY] or [STOP]. Then, press [F.FWD]. 4 Select the program number which you want to check by pressing [PLAY] or [STOP]. The details of the selected program appears on the TV screen. • Go to the digit you want to change by pressing [F.FWD] or [REW]. Then, enter correct numbers by pressing [PLAY] or [STOP]. • You may cancel the entire program by pressing [REW] during the program number flashes. 5 5 Press [COUNTER RESET/EXIT] to exit. 6 6 Press [POWER] to return to timer stand-by mode. Leave the cable box or satellite box on for timer recording. Set the tape speed Press [PLAY] or [STOP] repeatedly for the desired tape speed. Then, press [F.FWD]. • To go back one step, press [REW]. ONE TIME PROGRAM PROGRAM NUMBER 4 DATE 05/12 MON START TIME 07:30 PM END TIME 08:30 PM CHANNEL 16 REC SPEED SP SP SLP 5 5 To set another program, repeat step [4]. To exit, press 6 6 [COUNTER RESET/EXIT]. Press [POWER] to set the timer. The TIMER indicator on the VCR comes on. TIMER RECORDING WILL NOT BE ACTIVATED UNLESS YOU TURN THE VCR OFF. Counter Memory Function Use this feature to memorize the beginning of record ing start point. 1 Press [COUNTER RESET/EXIT] on the remote control to reset the counter. 2 Press [COUNTER MEMORY] on the remote control so that “M” appears on the TV screen. 3 Record the program. REC SP M0:00:00M0:00:00 4 4 After recording, press [STOP] then [REW]. • When “0:00:00” is reached, rewinding operation goes to stop. And you can view the recording program. • [COUNTER MEMORY] does not function if the Auto repeat mode is set to [ON]. In this case, set the Auto repeat mode to [OFF]. • To cancel the Counter memory mode, press [COUNTER MEMORY] so that “M” disappears from the TV screen. – 6– EN SPECIAL FEATURES Copying a Video Tape MTS (Multi-Channel Television Sound) System You can make copies of video tapes made by friends or relatives for your enjoyment. Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. Connect the recording VCR(this unit), the playing VCR (another source) and your TV using the following dia gram. Audio/Video cables(not supplied) [Recording VCR] (this unit) [TV set] (Use for monitoring) ANT in RF cable (supplied) [Playing VCR] (another source) IN OUT AUDIO VIDEO LEFT RIGHT ANTAUDIO VIDEO IN OUT OUT IN OUT L R IN 1 Insert a pre-recorded tape into the playing VCR. 2 Insert a tape with its safety tab into the recording VCR. 3 Press [SPEED] on the remote control of the recording VCR to select the desired recording speed (SP/SLP). 4 Select the “L1” or “L2”position on the recording VCR. See page 3, under “Using AUDIO/VIDEO Input Jacks”. 5 Press [REC/IRT] on the recording VCR. 6 6 Begin playback of the tape in the playing VCR. • For best results during dubbing, use the VCR’s front panel controls whenever possible. The remote control might affect the playing VCR’s operation. • Always use video-quality shielded cables with RCA- type connectors. Standard audio cables are not recommended. • You can use a video disc player, satellite receiver, or other audio/video component with A/V outputs in place of the playing VCR. To Monitor the Recording 1 1 Turn on the TV and set the TV to channel 3. If channel 3 is already occupied for br...