Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
may not function when... • Camcorder movement is too extreme. • recording a subject with distinct horizontal or vertical stripes. • recording in low light situations. • EIS indicator flashes when the light level is inadequate. • recording a subject under intense fluorescent light. • recording a scene with very fast motions. NegativelPositive Transposer This special effect feature allows you to change the picture from a positive to a negative image. Before you begin... • Set the POWER switch to CAMERA. Press NEG/POS to view or record a negative image. Press again for normal recording. • Hold down the NEG/POS button for about 3 seconds to activate this feature for the first time after the power is turned on. 39 Special Features Security Mode Great for amateur surveillance applications. Before you begin... You can select Motion, Audio, or Motion* • Connect the Camcorder to a power source. Audio Security mode. For extended Camcorder use, the AC Adaptor is recommended as the power source. • Insert a cassette with record tab (see page 12). • Set the POWER switch to CAMERA. • Aim the Camcorder at the desired area. Motion Security recording may start, regardless of subject motion, when... • the background is plain, such as a white wall. • the Camcorder is pointed at something with distinct horizontal, vertical or oblique stripes, such as a window shade. • the brightness suddenly changes. Motion Security recording may not start when... • motion is very slow or very fast. • moving object is very small. • motion is in 1 corner of the viewing area. • in low light situations (MOTION SECURITY will flash if the light level is inadequate.) • the background has distinct horizontal or vertical stripes. ■ the background is plain, such as a white wall. Audio Security recording may start when... • The mic picks up wind noise (even a breeze). Audio Security recording may not start when... • The sound is too abrupt. 40 1 In Record/Pause mode, hold down the SECURITY MODE button for about 2 seconds to place the Camcorder in Motion Security stand-by mode. impress the SECURITY MODE button once for Audio Security stand-by mode. Or, press twice for Motion*Audio Security stand-by mode. (If no cassette tape is inserted, “|+»T will flash.) MOTION I AUDIO M0T10N*AUDK> • The Camcorder will start recording approximately 3 seconds after motion and/or audio is detected. • The date and time are also recorded if displayed (see page 16). • Recording will stop 30 seconds after the motion and/or audio ceases. 3 Press the SECURITY MODE button once, twice, or three times, depending on the current mode, to cancel the Motion Security feature. Note: • Make sure the Camcorder is firmly secure before activating Motion Security feature. If the Camcorder is moved, Motion Security recording will start. • While normal recording is being performed, the Camcorder cannot be placed in Motion, Audio, or Motion*Audio Security stand-by mode. • While Camcorder is in Motion. Audio, or Motion»Audio Security stand-by mode, Record /Pause, Stand-by mode, Digital E.I.S., Color Digital Fade, One-Touch Auto Fade and Negative/Positive Transposer can not be activated. Audio Sensitivity You can choose HIGH or LOW Audio sensitivity during Audio or Motion*Audio Security recording. The Camcorder is set to№lYlat the factory. Before you begin... • Connect the Camcorder to a power source. • Insert a cassette with record tab (see page 12). During Audio Security or Motion«Audio Security stand-by mode (see page 42 press UP ▲ or DOWN ▼ to select or I wJi. SECURITY AUtMO KNSrnVTTY[|B3 ■ AUDIO or M0T10N*AUDI0 lilMil Camcorder is sensitive to sound (normal conversation etc.) up to approx. 32.8 feet (10m). IfrWI Camcorder is sensitive to sound (normal conversation etc.) up to approx. 3.28 feet (1m). • The Audio Sensitivity setting screen will revert to Audio or Motion«Audio Security stand-by mode after five seconds. «The Audio Sensitivity setting will revert to WWIwhen Palmcorder is turned off. Note: • Because the Audio Security feature may be activated by surrounding natural noises, the Camcorder should be placed in as quiet a place as possible. • When setting the Audio sensitivity level, the recording location should be taken into consideration. • The performance level may vary depending on the spaciousness of the area used as well as differences in noise reflection and resonance. • A test should be done to confirm that performance is satisfactory. 41 Special Features Time Lapse You can use this feature for security purposes by recording over a long period of time (up to 6 hours with a T-40 tape). MENU DISPLAY RECORD/ PAUSE Note (in Time Lapse mode): • Sounds can not be recorded. • Picture quality is lower than SLP mode. • The tape is recorded at 1/3 the speed of SLP • The tape is played back at normal SLP speed (3 times faster than it was originally recorded). • Video noise may occur during playback. •...