Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the surface coating. (If using a chemically-treated cloth, follow the instructions supplied with the cloth.) Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow long-term contact with rubber, vinyl products, or the like. (Doing so will cause deterioration.) Power cord plug FAQs, Wipe the plug with a dry cloth at regular intervals. (Moisture and dust can lead to fire or electrical shock.) FAQ Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer or Panasonic Service Center for assistance. For details (p. 54, 55) For additional assistance, please contact us via the website at: White spots or shadow images (noise) Check the position, direction, and connection of the antenna. Interference or frozen digitalchannels (intermittent sound) Change the direction of antenna for digital channels. Check “Signal meter” (p. 39). If the signal is weak, check the antenna and consult your local dealer. The LCD panel movesslightly when it ispushed with a finger. A clattering sound might be heard This is not a malfunction. There is some looseness around the panel to prevent damage to the panel. The remote control does not work Are the batteries installed correctly? (p. 7) Are the batteries new? Pictures from external equipment are distorted whenthe unit is connected via HDMI Is the HDMI cable connected properly? (p. 31, 43) Turn Off the TV unit and equipment, then turn them On again. Check an input signal from the equipment. (p. 48) Use equipment compliant with EIA/CEA-861/861B. When the channel is changed onan STB that is connected with HDMI, “HDMI” may be displayedon the top left of the screen This is not a malfunction. Recording does notstart immediately Check the settings of the recorder. For details, read the manual of the recorder. If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model number and serial number (both found on the rear of the TV). Problem Actions Screen Sound Other Some spots remainbright or dark The LCD panel is made up of a few million pixels and is produced with advanced technology through an intricate process. Sometimes a few pixels may be bright or dark. These pixels do not indicate a defective panel and will have no impact on the performance of the TV. Chaotic image, noisy Check nearby electrical products. (car or motorcycle ignition systems, fluorescent lamp, etc.) No image isdisplayed on screen Check Picture menu (p. 28) Check the cable connections. Check that the correct input has been selected. Only spots are displayedinstead of images Check the channel settings. (p. 38) Check the antenna cables. Neither image norsound is produced Is the power cord plugged into the outlet? Is the TV unit turned On? Check Picture menu (p. 28) and volume. Check the AV cable connections. (p. 9-10) Check that the correct input has been selected. (p. 24) Black Box appears Change settings of Closed caption (CC). (p. 40) No sound is produced Are the speakers’ cables connected correctly? (p. 43) Is “Sound Mute” active? (p. 11) Is the volume set to the minimum? Is “TV speakers” set to “Off”? (p. 28) Change “SAP” settings. (p. 15) Check “HDMI 1 in”, “HDMI 2 in” or “HDMI 3 in” settings. (p. 28) Sound is unusual Set “SAP” setting to “Stereo” or “Mono”. Check the HDMI device connected to the unit. Set the audio setting of the HDMI device to “Linear PCM”. If digital sound connection has a problem, select analog sound connection. Unknown sound heard 1-Sounds from TV cabinet 2- Tick/Click sound3- Buzzing sound 1-Changes in the temperature and humidity of the room may cause the TV’s cabinet to expand or contract and produce metallic sounds. This is not a sign of faulty operation or a malfunction. 2- When the TV is powered on, an electrical component in the TV activates producing a tick/click sound. This is not a sign of faulty operation or a malfunction. 3- Electrical circuits are active while the TV set is on. This is not a sign of faulty operation or a malfunction. The main unit is hot. The main unit radiates heat and some of the parts may become hot. This is not a problem for performance or quality. Set up in a location with good ventilation. Do not cover the ventilation holes of the TV with a tablecloth, etc., and do not place on top of other equipment. Frequently Asked FAQs, Specifications TC-L37D2 TC-L42D2 Power Source AC 110-127 V, 60 Hz PowerConsumptionMaximum Standby condition 130 W 0.3 W 137 W 0.3 W Display panelAspect Ratio 16:9 Visible screen size (W . H . Diagonal) (No. of pixels) 37” class (37.0 inches measured diagonally) 42” class (42.0 ...
Dieses Handbuch ist für folgende Modelle:Fernseher - TCL42D2 (2.06 mb)