Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: JVC Dateigröße: 2.91 mb Dateiname: Unterrichtssprache:

When programming the timer using the SHOWVIEW system, be sure to check the desired channel is selected correctly (. pg. 24, “SHOWVIEW® Timer Programming”). . Your video recorder memorizes all detected stations even if reception of some of them is poor. You can delete those stations with an unacceptable picture (. pg. 43, “Delete A Channel”). INFORMATION Language for the on-screen display Auto Set Up also selects the language automatically for the on-screen display depending on the Country setting you have made in step 2 on page 8 (unless you have selected BELGIUM or SUISSE), as shown below. SUOMI ] SUOMI DANMARK ] DANSK NEDERLAND ] NEDERLANDS PORTUGAL ] ENGLISH OSTERREICH ] DEUTSCH GREECE ] ENGLISH DEUTSCHLAND ] DEUTSCH CESKA REPUBLIKA ] CEcTINA OTHER WESTERN EUROPE] ENGLISH POLSKA ] POLSKI ITALIA ] ITALIANO OTHER EASTERN EUROPE ] ENGLISH NORGE ] NORSK MAGYARORSZAG ] MAGYAR SVERIGE ] SVENSKA ESPANA ] CASTELLANO If you want to change the language setting manually, see “Language” on page 12. Just Clock Your recorder is equipped with the Just Clock function which provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal. If you want to take advantage of this function, simply set it to “ON” (. pg. 48, “Just Clock”). 12 EN INITIAL SETTINGS (cont.) This recorder offers you the choice to view on-screen messages in 13 different languages. Though Auto Set Up Language selects the language automatically (. pg. 11), you can change the language setting manually as required. Turn on the TV and select the video channel (or AV mode). A A Access the Main Menu screen. Press MENU. B B Access the Country Set screen. Press rt to move the highlight bar (pointer) to “AUTO CH SET”, then press OK or e. C C Select your country. Press rt to move the highlight bar (pointer) to your country’s name, then press OK or e. D D Select the language. Press rt to move the highlight bar (pointer) to the language of your choice. . You do not have to press OK; pressing OK enters AUTO SET/ T-V LINK screen. E E Return to the normal screen. Press MENU. 21-pin SCART cable (not provided) SAT CONTROL AV2 (L-2) IN/DECODER Back of recorder Satellite receiver 21-pin SCART cable (not provided) SAT CONTROL AV2 (L-2) IN/DECODER Back of recorder Satellite receiver SAT CONTROL SET EN 13 The following procedure is required if you receive satellite channels through a satellite receiver. Satellite Receiver Approximately 20 seconds before the SHOWVIEW timer Control Setting Satellite receiver Satellite Controller (not provided) (suggested locations) Transmitter Your recorder Satellite Controller (not provided) programming (. pg. 24) or Express timer programming (. pg. 26) starts, the recorder sets its input mode to “L-2” and automatically switches the satellite receiver’s channels using an optional Satellite Controller. Installing Satellite Controller A A Situate the Satellite Controller. Place the Satellite Controller so that the path between its transmitter and the satellite receiver’s remote sensor is unobstructed. B B Attach the Satellite Controller. Fix securely using the adhesive strip attached on the back of the Satellite Controller. C C Make connections. Be sure to connect the recorder’s AV2 (L-2) IN/DECODER connector to the satellite receiver’s 21-pin SCART connector. NOTE: When connecting your satellite receiver, refer to its instruction manual. D D Connect the Satellite Controller to recorder. Connect the Satellite Controller to the SAT CONTROL connector on the rear panel. 14 EN SAT CONTROL SET (cont.) Setting satellite receiver's brand and channel After installation, set the satellite receiver’s brand and channel correctly; otherwise, the Satellite Controller cannot work correctly. Turn on the TV and select the video channel (or AV mode). A A Turn on the satellite receiver. Turn on the satellite receiver’s power. B B Access the Main Menu screen on the recorder. Press MENU. C C Access the Initial Set screen. Press rt to move the highlight bar (pointer) to “INITIAL SET”, then press OK or e. D D Access the Sat Control Set screen. Press rt to move the highlight bar (pointer) to “SAT CONTROL SET”, then press OK or e. E E Enter the satellite receiver’s brand. Press the appropriate NUMBER keys to enter the brand code from the list on page 15, then press OK. . If the brand code you entered is invalid, the code field will be reset. Enter the correct brand code again. . If the recorder is in playback or recording, you cannot set the brand code. F F Select the satellite receiver’s channel. Press the appropriate NUMBER keys to enter the channel position on the satellite receiver, then press OK. . You can select the channel position between 1 to 999. . After pressing OK, the recorder enters the Test mode. SAT CONTROL SET (cont.) T-V LINK EN 15 G G Check the result of the test. If the satellite receiver’s channel number has been changed to the same one as you set in step 6 ... Press rt to move the highlight ba...

Herunterladen

Geben Sie zwei Ziffern: