Stimmen - 1, Durchschnittliche Bewertung: 4 ( )

Hersteller: JVC Dateigröße: 2.91 mb Dateiname: 69ac19c5-faab-4bee-8771-610b55123ef2.pdf Unterrichtssprache:

. Auto Clock Set may not function properly depending on the reception condition. . If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect. Select the appropriate TV system for those channels (. pg. 43, “INFORMATION”). 10 EN INITIAL SETTINGS (cont.) Preset Download Auto Channel Set by Downloading from TV/Auto Clock Set/Auto Guide Program Number Set ATTENTION You can use this function only with a TV offering T-V Link, etc.* Be sure to use a fully-wired 21-pin SCART cable. * Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link, DATA LOGIC or NexTView Link via fully- wired 21-pin SCART cable. The degree of compatibility and available functions may differ by system. NOTES: . For details, refer to the instruction manual of your TV. . In the area where no TV station transmits a PDC (Programme Delivery Control) signal, the recorder can perform neither Auto Clock Set nor Auto Guide Program Number Set. . If there is a power cut, or if you press 1 or MENU while downloading or set up is in progress, it will be interrupted; be sure to turn off the recorder power once and try again from the beginning. . Auto Clock Set may not function properly depending on the reception condition. . On this recorder, the characters available for station names (ID) are A–Z, 0–9, –, f, + and I (space). Some names of downloaded stations may differ from those of your TV (. pg. 44). If you have connected the recorder to your TV via the AV connection (. pg. 7), the recorder will automatically perform Preset Download instead of the Auto Set Up in step 4 on page 9. After downloading, the recorder sets the clock and Guide Program numbers automatically. Perform steps 1 to 3 of “Auto Set Up” on page 8 before continuing. A A Perform Preset Download. Press OK. The AUTO SET/T-V LINK display appears on the front display panel and/or on the TV screen. On the front display panel Press rt to select “CH – –” and press OK or e. On the on-screen display Press rt to move the highlight bar (pointer) to “T-V LINK” and press OK or e. Preset positions on the front display panel increase from “CH1”; do NOT press any button on the recorder or remote control until the front display panel shows clock time, “(CH) 1” or “– –:– –” as illustrated on page 11. . If you are using the on-screen display, the T-V LINK screen will appear. Then the GUIDE PROG SET screen will appear during Guide Program Number Set. . If you press any button on the recorder or remote control while downloading is in progress, it will be interrupted. B B Set the video channel. Set the video channel to off manually. (. pg. 46) EN 11 Results of Auto Set Up/Preset Download appear on the front display panel If both Auto Channel Set and Auto Clock Set have been performed successfully, the correct current time is displayed. Turn on the TV and select its video channel or AV mode, then make sure that all necessary stations have been stored in the recorder’s memory by using the PR button(s). . If station names (ID – . pg. 45) have also been stored in the recorder’s memory, the station name will be displayed at the top left corner of the TV screen for about 5 seconds when the recorder is tuned to a different station. . If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or change station names, see pages 42 – 45. If Auto Channel Set has succeeded but Auto Clock Set has not, “1” (channel position) is displayed. A Turn on the TV and select its video channel or AV mode, then make sure that all necessary stations have been stored in the recorder’s memory by using the PR button(s). . If station names (ID – . pg. 45) have also been stored in the recorder’s memory, the station name will be displayed at the top left corner of the TV screen for about 5 seconds when the recorder is tuned to a different station. . If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or change station names, see pages 42 – 45. B Perform “Clock Set” on page 48. If both Auto Channel Set and Auto Clock Set have failed, “– –:– –” is displayed. Make sure the cables are connected properly and turn off the recorder’s power once, then turn the recorder’s power back on again. The Country Set display appears on the front display panel and/or on the TV screen; perform “Auto Set Up” on page 8 or “Preset Download” on page 10 again. IMPORTANT . To check if the Guide Program numbers have been set correctly, perform the SHOWVIEW Timer Programming (. pg. 24). . In certain reception conditions, station names may not be stored correctly, and auto Guide Program Number Set may not work properly. If the Guide Program numbers are not set properly when you timer-record a TV programme using the SHOWVIEW system, the recorder will record a TV programme of a different station. When programming the timer us...

Herunterladen

Geben Sie zwei Ziffern: