ForSearsprofessionalinstallationofhomeappliancesanditemslikegaragedooropenersandwaterheaters. 1-800-4-MY-HOME®(1-800-469-4663) Callanytime,dayornight(U.S.A.andCanada) andelectronics,callorgoon-lineforthelocationofyournearestSearsParts&RepairCenter. 1-800-488-1222Callanytime,dayornight(U.S.A.only) ormaintenanceagreement(Canada)onaproductservicedbySears: 1-800-827-6655(U.S.A.)1-800-361-6665(Canada) Parapedirserviciodereparacionadomicilio,yparaordenarpiezas: 1-888-SU-HOGARSM(1-888-784-6427) AuCanad

2 ................................................ 11Common Problems GasGasGasGasGas CooktopWelcome .................................. 2 Important Safety Instructions .. 3-5 Before Setting Surface Controls .................... 6 Setting Surface Controls ....... 7 Care & Cleaning................. 8-11 Before You Call Solutions to Warranty ................................ 12 318200672 (0506) Rev. A s Questions? 1-800-944-9044 (United States) 1-866-294-9911 (Canada) Please attach sales receipt here

READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. FOR YOUR SAFETY: — Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. — WHAT TO DO IF YOU SMELL GAS: • Do not try to light any appliance. • Do not touch any electrical switch; do not use any phone in your building. • Immediately call your g

READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Cooktop Dimensions IMPORTANT INSTALLATION-INFORMATION • All electric cooktops run off a single phase, three-wire or four-wire cable, 240/208 volt, 60 hertz, AC only electrical supply with ground. • Please note minimum distances between cooktop and adjacent and overhead cabinetry is 30" (76.2 cm). * 30" (76.2 cm)

The heat output of the individual cooker plates can be regulated over a wide range with the approved seven position switch. The knobs of the appliance to be fitted underneath the hob unit as well as the knobs of the control panel for the hob unit can be switched into 6 different positions besides the "off-posi- tion“ 0. On the dial plates you find the numbers 0, III, II and I and between the numbers one dot. The dots between the numbers indicate three addational intermediate positions. You hav

When requesting service or ordering parts, always provide the following information: • Product Type • Part Number • Model Number • Part Description Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A P/N 318202931 Publication number 5995425575 790.4274 CONTROL PANEL CAUTION: Use the Kenmore part number to order part, not the illustration number. 01/05 2 790.4274 CONTROL PANEL CAUTION: Use the Kenmore part number to order part, not the illustration number. Model Index: A 790.4274 (790.4274140

2 Push the surface control knob down and turn counterclockwise out of the OFF position. 3 Release the knob and rotate to the LITE position (see figure 1). Note: All four electronic surface ignitors will spark at the same time. However, only the burner you are turning on will ignite. 4 Visually check that the burner has a flame. 5 Turn the control knob counterclockwise to the desired flame size. The control knobs do not have to be set at a particular setting. Use the knob indicator settings to ad

pin 316417309 (0408) Table of Contents Freestanding Range Warranty ................................................. 2 IMPORTANT SAFETY INSTRUCTIONS ..................................... 3-5 Protection Agreements ............................................................ 6 Before Using Your Range .......................................................... 7 Assembly of Burner Heads, Caps & Grates ....................... 7 Range Features ..........................................................

4). CONTINUE holding the pad until "12 Hr"(Fig. 5) or "24 Hr" appears in the display. 2. Press @ to switch between the 12 and 24 hour time of day display. The display will show either "12 Hr" (Fig. 5) or "24 Hr" (Fig. 6). Fig. 5 3. Press _ to accept the desired change or press _ to reject the change. 4. Reset the correct time as described in To set the Clock above. Fig. 6 Please note that if the 24 hour time of day mode was chosen, the clock will now display time from O:OOthrough 23:59 hours. 17

Please note that not all cookware will fit the Bridge element correctly. When cooking has completed, turn the surface control Figure 1 Figure 3 knob to OFF before removing the cookware. The HE message wilt appear in the display after turning the control knob to OFF if the cooktop is still hot and will remain on until the radiant heating surface area has cooled sufficiently. The BRIDGE element may also be used in combination with the left rear single element. Because these elements have 2 differe