Stimmen - 1, Durchschnittliche Bewertung: 5 ( )

Hersteller: Garland Dateigröße: 2.82 mb Dateiname: Unterrichtssprache:

cycle temperature. INSTRUCTIONS PRESS DISPLAY To adjust the oven temperature higher: 1. Press _ for 6 seconds (Fig. 1). 2. To increase the temperature use the number pads to enter the Figure 1 desired change. (Example 30°F) _ _ (Fig. 2). The O temperature may be increased as much as 35°F (17°C). Figure 2 3. Press _ to accept the temperature change and the display will return to the time of day (Fig. 3). Press _ to reject the change if necessary. Figure 3 To adjust the oven temperature lower: 1. Press _ for 6 seconds (Fig.4). 2. TO decrease the temperature use the number pads to enter the Figure 4 desired change-(Example -30°F) @ @ and then @@@ press (_ (Fig. 5). The temperature may be decreased as much as 35°F (17°C). Figure 5 3. Press _ to accept the temperature change and the display will return to the time of day (Fig. 6). Press _ to reject the Figure 6 change if necessary. 3O General Care & Cleaning FEATURE OVERVIEW General Care & Cleaning Surfaces Aluminum & Vinyl Painted and Plastic Control Knobs, Body Parts, and Decorative Trim StainlessSteel, Chrome Control Panel, Decorative Trim Porcelain Enamel Broiler Pan and Insert, Door Liner, Body Parts, Warmer Drawer Oven Racks Oven door Table How to Clean Use hot, soapy water and a cloth. Dry with a clean cloth. For general cleaning, use hot, soapy water and a cloth. For more difficult soils and built-up grease, apply a liquid detergent directly onto the soil. Leave on soil for 30 to 60 minutes. Rinse with a damp cloth and dry. DO NOT use abrasive cleaners on any of these materials; they can scratch. To remove control knobs, turn to the OFF position; grasp firmly and pull straight off the shaft. To replace knobs after cleaning, line up the flat sides of both the knob and the shaft; then push the knob into place. Before cleaning the control panel, turn all controls to OFF and remove the control knobs. To remove, pull each knob straight off the shaft. Clean using hot, soapy water and a dishcloth. Rinse with a clean water using a dishcloth. Be sure to squeeze excess water from the cloth before wiping the panel; especially when wiping around the controls. Excess water in or around the controls may cause damage to the appliance.To replace knobs after cleaning, line up the flat sides of both the knob and the shaft; then push the knob into place. Clean stainless steel with hot, soapy water and a dishcloth. Rinse with clean water and a cloth. Do not use cleaners with high concentrations of chlorides or chlorines. Do not use harsh scrubbing cleaners. Only use kitchen cleaners that are especially made for cleaning stainless steel. Always be sure to rinse the cleaners from the surface as bluish stains may occur during heating that cannot be removed. Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a 1:1 solution of clear water and ammonia. If necessary, cover difficult spots with ...

Herunterladen

Geben Sie zwei Ziffern: