Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Mitsubishi Electronics Dateigröße: 3.74 mb Dateiname: Unterrichtssprache:

7. You may also press INFO to display detailed instructions on using the Advanced Convergence. Then press INFO or MENU to return to the Advanced Convergence menu. Reset Factory Defaults Menu Figure 12 This allows you to reset the convergence to the original factory settings. The message “Convergence reset completed” will be displayed when the factory defaults have been restored. WARNING:RESETCONVERGENCETOFACTORYDEFAULTS. Allmanualchangestoredandblueconvergenceandadvancedconvergencewillbedeleted. PressENTERtoResetconvergencetothedefaults. PressHOMEorMENUtoreturntothemenuwithoutresettingconvergence. Figure 12. Reset Factory Defaults Menu NetCommand® Menu Remote Control Transport Buttons Transport buttons (rewind, play forward, stop, pause and record) on the remote control are located in the bottom section of the remote control. Default Digital Record Device If multiple recording devices are available in NetCommand, this setting allows you to choose the device to use when recording digital programs. A digital recording can be made on either a digital or analog device although the quality will not be as good if recorded on an analog device. For best playback quality, record digital programs on a digital recording device. If multiple devices were not connected and then added in the NetCommand setup, this setting will be unavailable (grayed out). Analog recordings can only be made on the one analog device connected to Monitor Out (usually a VCR) and are not affected by this setting This feature is most useful when recording from ChannelView™ (page 49). Icon Order Figure 15 The Icon Order screen allows you to arrange the device icon order on the Device Selection menu to a different sequence, for ease of selection and operation. To change the order, press ADJUST , , , or to highlight the icon to be moved and then press ENTER. Press ADJUST , , or to move the icon to the desired position and then press ENTER to select the icon. NetCommand Menu Figure 13 ................................................................................................................ Figure 13. NetCommand menu Detailed information for setting up and editing the NetCommand menu is found in Chapter 3. Edit NetCommand allows you to add new devices, change or edit traditional and IEEE 1394 devices, turn devices and unused inputs On or Off, delete a single device or the entire setup configuration. If you choose to delete the entire configuration, or if the NetCommand setup was cancelled, deleted or not completed, you can start at the Initial NetCommand screen. The Review screen shows all devices connected to the TV, including IEEE 1394 devices. MainPicture Transport Menu Figure 14 NetCommand uses the Transport menu to control VCRs, DVDs, IEEE 1394 AV Discs, digital VCRs, and similar devices. If you choose to turn off this menu when viewing the devices, the transport buttons (rewind, play forward, stop, pause and record) on the TV’s remote control will continue to operate these devices. In the Device Selection menu selecting a VCR or DVD Player will automatically display the Transport menu. Re-display this menu by pressing DEVICE MENU. Select Transport menu functions by pressing ADJUST or and then ENTER. For example, to pause playback, press ADJUST or to move to PAUSE, then press ENTER. If a function is not possible, such as record for a DVD Player, the Transport menu button will be grayed out. Figure 14. Transport Menu Figure 15. Icon Order Menu Antenna Menu Antenna Menu Figure 16 Antenna Menu The Antenna Menu options are available for use with analog and digital channels on Antenna-1 and Antenna- 2. You can memorize, add or delete, name and add channels to an SQV (Super Quick View™) list. Memorize For Antenna-1 (Main) or Antenna-2 (Aux) Select either Air (when used with an indoor/outdoor antenna) or Cable (when used with direct cable) then press ENTER to start the automatic channel memorization process. If a CableCARD is being used, memorized channels are provided by your cable provider through the CableCARD. To stop the automatic channel memorization process, press CANCEL. Channels memorized before you pressed CANCEL are retained in memory. After memorizing channels, the channels in the memory can be accessed in ascending or descending order or by pressing CH or . The memorization will occur twice, as the TV memorizes analog and digital channels separately. Prefer Digital If a memorized channel is shown both as an analog and digital channel, a check mark in the Prefer Digital box will show the digital and hide the analog channels, when using CH. Removing the checkmark will show both analog and digital choices. Channel For additional Channel editing, press ADJUST or to select the channel or press CH or for channels already in memory. Channels can also be selected by using the number buttons. To immediately tune to the listed channel, press ENTER after entering the number(s). For digital channels, when the broadcaster has sent a virtual chan...

Herunterladen

Geben Sie zwei Ziffern: