Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Hitachi Dateigröße: 3.74 mb Dateiname: Unterrichtssprache:

Press ENTER to select the device to view and hear. The TV inputs are automatically changed. If NetCommand is set up, the inputs on compatible A/V Receivers are automatically changed at the same time. Device Section Figure 26. Device Selection Menu with NetCommand PIP Device Selection Menu Figure 27 The PIP Selection menu displays when you press the PIP DEVICE button on the remote control. This menu has the same general format as the Device Selection menu. The destination for the Video Section is the sub picture and the Audio and Connection Sections are not available. Use ADJUST , , or to move the highlight to the device to show in the PIP or POP screen, then press ENTER. Device icons that are grayed out are not available for use as PIP/POP sources or with the current source. Power On/Off Devices Some devices will power On automatically when you select the device and will power Off when you turn off the TV. For devices that do not power On or Off automatically, display the Device Selection menu, press ADJUST or to highlight the device icon and press POWER on the remote control. For the A/V Receiver, press AUDIO to move the navigation to the Audio Section. Highlight the A/V Receiver icon and press POWER. If you press POWER on the remote control when the Device Selection menu is not displayed, the TV will turn Off. Video Section The TV icon shows the destination for the device highlighted in the Device Section. Connection Section The Connection Section shows the other devices currently connected to the device highlighted in the Device Section. For example, if the digital VCR (DVCR) is currently recording on Ant-1, the DVCR icon will appear in the Connection Section when you move the highlight to the Ant-1 icon. This icon will disappear when you move the highlight to another icon. Audio Section When a NetCommand pre-memorized or learned IR controlled A/V Receiver has been connected to the TV and added to NetCommand Setup, an AVR icon will appear in the audio section. Press AUDIO to change navigation to the audio section. Then press ADJUST , , or to select the TV speakers icon or the A/V Receiver icon. Press ENTER to change the audio selection. Press DEVICE to return the navigation to the Device Section. MainPicture Video Section Device Section Figure 27. PIP Device Selection Menu IMPORTANT If a device does not respond to separate On or Off remote control signals, the manufacturer has not provided that ability for the device. Using the Device Menu Button to Display Menus Moving Through Other CableCARD Screens In addition to CableCARD menus, other CableCARD application screens may display and require you to make additional selections. While CableCARD application screens are customized in each area, some general rules apply in using these screens on your Mitsubishi television. 1. Blue text denotes a link to another screen. Press ENTER to move to the next application. When screens do not have blue text, there are no more links. 2. You cannot move backward through the links. If you want to exit the CableCARD system, press HOME to exit and return to TV viewing. CANCEL does not apply to the CableCARD screens. All information on these application screens is provided by your local cable company. Please contact your cable provider if you have any problems with the application screen displays. Device Menu Pressing the remote control’s DEVICE MENU button displays the menu for the current device source. IR Controlled Devices/IEEE 1394 Menus For a NetCommand compatible traditional IR controlled or an IEEE 1394 device, pressing DEVICE MENU once or twice will display the menu for that device. While the menu for the device is displayed, press ADJUST , , or and ENTER to navigate the screen. For some NetCommand traditional devices you will also be able to use the number buttons and other additional buttons on the TV remote. For traditional DVD players, DEVICE MENU is also known as the setup menu. CableCARD™ Menu Figure 28 For programs viewed with CableCARD, pressing DEVICE MENU will display a list of up to 8 links to applications that contain basic CableCARD information made available from your cable provider. Press ADJUST or to move through the application links. To select a link (blue text) to an application, press ADJUST or to highlight the link, then press ENTER to access the linked page. Pressing DEVICE MENU will return to the CableCARD menu screen and pressing HOME will return to TV viewing. If there are technical problems with the CableCARD, an error screen will automatically display with information that may be needed by your Cable provider when you call them for assistance. PressHOMEkeytoexit Figure 28. Device Menu for CableCARD 4 IEEE 1394 Devices and NetCommand® Controlled Recordings Adding IEEE 1394 Devices Automatically46 IEEE 1394 Compatibility48 Using the Guide Button to Display ChannnelView™ and Menus49 NetCommand® Controlled Recordings50 Direct VCR Recording52 NetCommand® Controlled Peer-to-Peer Connections53 Imp...

Herunterladen

Geben Sie zwei Ziffern: