Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Hitachi Dateigröße: 3.74 mb Dateiname: Unterrichtssprache:

The TV will immediately switch to the selected channel and start recording. To record a future program, press ADJUST or to select the channel you want to record from. Press INFO to see the upcoming programs for that channel. Press ADJUST or to move to your program choice. Press REC (record) when your choice is highlighted in ChannelView. A red “R” will be added before the program time. The message, “The recording has been added to the Record List” will display. To view, change or cancel the recording, use the Record List (page 51). The program you selected will be on that list. Device Selection Menu For compatible traditional VCRs, pressing GUIDE when the VCR is highlighted on the Device Selection menu will change the VCR’s input. When the A/V Receiver icon is highlighted in the Audio Section, pressing GUIDE switches the A/V Receiver from analog audio to digital audio and vice versa. Record To Menu When in the Record To menu, pressing GUIDE will display the current programmed recordings. Please see Record List, page 51 for more infomation. Figure 7. ChannelView screen, future programs IMPORTANT For complete ChannelView information to be refreshed daily, the TV must be powered Off between 5 to 15 minutes a day, depending on the number of channels in memory. If the TV loses power, the program listings will be temporarily lost. Figure 6. ChannelView screen, current programs NetCommand® Controlled Recordings Record To Setup Figure 8 Your TV is able to start and stop recordings automatically and send the signals from one external playback device to another external recording device. It is also able to convert digital channels and IEEE 1394 device signals to analog signals that can be recorded on NetCommand compatible analog VHS and S-VHS VCRs. You cannot record from an analog channel or device or a VHS or S-VHS VCR to a digital recording device such as a DVCR or A/V Disc. You can schedule the recording to take place at a later time and program the recording duration for a minimum of 30 minutes and a maximum of 6 hours (in 30 minute increments). The default is 1 hour. When a digital recording is being made, the TV will direct the signals to the recording device using the IEEE 1394 cable. When an analog recording is being made, the TV will direct signals to the recording device. During a recording, the TV can be powered Off. If the TV is powered On, it must be tuned to the source that is being recorded. Recording Now Can be used when viewing Antenna 1 or 2, an IEEE 1394 device, or a non-recording traditional device. To initiate recording now: 1. Press REC (record) on the TV remote. 2. Press DEVICE on the remote control to move to the Source Device section. 3. Press ADJUST or to select the source device you will record from. 4. Press ENTER to confirm selection and return to the “Record to” section. 5. In the “Record to” section, review the destination device (VCR) and duration. Change if necessary. 6. Press REC a second time to initiate recording. Time-Delayed Recording To initiate a time-delayed recording: 1. Press REC (record) on the TV remote. 2. Press DEVICE on the remote control to move to the Source Device section. 3. Press ADJUST or to select the source device you will record from. 4. Press ENTER to confirm your Record from selection and move to the Record to section. 5. Press ADJUST or to select the Record to device, duration time, start time (press ENTER after selecting hour, minutes and AM or PM to set the time) and day. For devices that can select channels, select the channel. 6. Select Add and press ENTER to add the recording to the record list. If your selection is successful, a confirmation message will be displayed. If you pick overlapping times, day(s), or destination devices, you will see a message stating there is a conflict. 7. To exit, press HOME after all recordings have been added. Figure 8. Record to screen Copy-Protected Material When attempting to record copy-protected material, the Record functions of the NetCommand and IEEE 1394 systems may be prevented or stopped. If you have a recording that is tagged “Record Once”, NetCommand will change the tag to “Record No More”. NetCommand® Controlled Recordings, continued Track List Screen Figure 10 When viewing an A/V Disc, press GUIDE to display its Track List. The time and date it was added, the duration and title will be displayed. Tracks will be listed in date and time order with the most recent recording listed first, and will vary in size. Press ADJUST or to navigate through the Track List. To play a track, select it on the list, then press ENTER. To change pages, press CH or . To delete a track, select it on the list and press CANCEL. Record List Screen Figure 9 To see a list of all currently programmed recordings, press GUIDE while viewing the Record To screen. A maximum of 32 recordings can be scheduled. To cancel a recording on the Record List, press ADJUST or to select the recording, then press CANCEL. To page through the list, press C...

Herunterladen

Geben Sie zwei Ziffern: