Note: Both the “Directed Call Pickup” feature and the “Playing a Ring Splash” feature are disabled by default. Operational 41-001160-00, Rev 01 Release 2.0 5-51 IP Phone Administrator Guide Operational Features Operational IP Phone Features Enabling/Disabling Directed Call Pickup Use the following procedure to enable or disable the Directed Call Pickup feature on the IP phone. Configuration Files To enable/disable Directed Call Pickup on the IP phone using the configuration files, see Appendix A

Advanced Volume Controls for the Headset Mic On the 6753i, there are 3 options for the headset microphone volume. For more information about the headset microphone, see “Headset Mic Volume” on page 27. IP Phone UI To change the volume: 1. Press to enter the Options list. 2. Select Preferences and press 4. 3. Use 2 to scroll down to Set Audio and press 4 to select. 4. Press 2 to scroll down to Headset/Mic Volume and press 4to select. 5. Use 2 to scroll down the list and press 4 to select your des

If your Network does not provide Inline power over Ethernet, you can obtain an additional accessory, the a PoE inline power injector, to provide power over Ethernet locally to your phone. See the section "Connecting to the Network and to Power" on page 9 for details. Can I turn the backlight for the screen on and off? Yes. You can use the IP phone UI to turn ON and OFF the backlight for the screen. 1. Press the key. 2. Select Display>Backlight. 3. Press the Change key to turn the backlight

Note: For this feature to work, UPnP must be enabled on the phone (upnp manager and upnp gateway must be set). Format Integer Default Value 0 (UPnP is not mapped to a specific line) Range 0 to 10 Example upnp mapping lines: 5 This example indicates that line 5 allows UPnP mapping. Virtual Local Area Network (VLAN) Settings Global Parameters Parameter - tagging enabled VLAN Enable (in Web UI) IP phone UI Options->Administrator Menu-> Network Settings->VLAN->VLAN Enable Aastra Web UI Advanc

You will have to subscribe to a Calling Line Identification service to take advantage of this feature. . If the Handsfree mode (speakerphone) is not working, ensure that you have the Headset option disabled in the options list. . The 9516CW is able to make and receive calls even during a power failure. Features such as the display, memory keys, and answering machine will not work without power. . To call back local calls from the Callers List, be sure to remove the area code. . Remember that the

Microsoft, Microsoft Windows, and Internet Explorer are trademarks of Microsoft Corporation. Ethernet is a registered trademark of Xerox Corporation, Inc. UNIX is a registered trademark in the United States and other countries, licensed exclusively through The Open Group. Asterisk is a registered trademark of Digium, Inc. Linux is a registered trademark of Linus Torvalds. All other third-party trademarks (and registered trademarks) are the property of their respective owners. © 2008 Aastra Techn

. Callers List This icon located just above the softkey allows access to the Callers List feature. Status Messages Display Message Description Microphone mute Indicates when the Mute button has been Activated Out of range Appears briefly when pressing a key if out of range of the base station Handset Keys Softkeys ( { or }) Your 6757i CT RP cordless handset has 2 softkeys directly under the LCD display. The softkey menus change depending on the phone’s state, displaying relevant softkeys only. T

The information contained in this documentation is subject to change without notice. Copyright 2010 Aastra Telecom. All Rights Reserved. Contents General Information ..................................................................................................................................2 Release Content Information ................................................................................................................2 Hardware Supported .........................................