Stimmen - 4, Durchschnittliche Bewertung: 4.8 ( )

Hersteller: Aastra Telecom Dateigröße: 14.12 mb Dateiname: 28d41ce2-930d-2a44-dde2-f18d5aabdba6.pdf Unterrichtssprache:

Note: For this feature to work, UPnP must be enabled on the phone (upnp manager and upnp gateway must be set). Format Integer Default Value 0 (UPnP is not mapped to a specific line) Range 0 to 10 Example upnp mapping lines: 5 This example indicates that line 5 allows UPnP mapping. Virtual Local Area Network (VLAN) Settings Global Parameters Parameter - tagging enabled VLAN Enable (in Web UI) IP phone UI Options->Administrator Menu-> Network Settings->VLAN->VLAN Enable Aastra Web UI Advanced Settings->Network->VLAN->Global Configuration Files aastra.cfg, .cfg Description Enables or disables VLAN on the IP phones. This is a global setting. Format Boolean Default Value 0 (false) Range 0 (false) 1 (true) Example tagging enabled: 1 A-36 41-001160-01, Rev 00, Release 2.3 Operational, Basic, and Advanced Parameters Parameter - priority non-ip Priority, Non-IP Packet (in Web UI) IP phone UI Options->Administrator Menu-> Network Settings->VLAN->Phone->Priority ->Other Aastra Web UI Advanced Settings->Network->VLAN->Global Configuration Files aastra.cfg, .cfg Description Specifies the priority value for non-IP packets. This is a global setting. Format Integer Default Value 5 Range 0 to 7 Example priority non-ip: 7 LAN Port (Ethernet Port О) Parameters Parameter - vlan id VLAN ID (for LAN Port in Web UI) IP phone UI Options->Administrator Menu-> Network Settings->VLAN->Phone->VLAN ID Aastra Web UI Advanced Settings->Network->VLAN->Port 0 Configuration Files aastra.cfg, .cfg Description VLAN is a feature on the IP phone that allows for multiple logical Ethernet interfaces to send outgoing RTP packets over a single physical Ethernet as described in IEEE Std 802.3. On the IP phone, you configure a VLAN ID that associates with the physical Ethernet Port 0. Format Integer Default Value 1 Range 1 to 4094 Example VLAN id: 300 41-001160-01, Rev 00, Release 2.3 A-37 IP Phone Administrator Guide Operational, Basic, and Advanced Parameters Parameter - tos priority map IP phone UI Options->Administrator Menu-> Network Settings->VLAN->Phone-> Priority->SIP SIP Priority RTP Priority RTCP Priority Options->Administrator Menu-> Network Settings->VLAN->Phone-> Priority->RTP (for LAN Port in Web UI) Options->Administrator Menu-> Network Settings->VLAN->Phone-> Priority->RTCP Aastra Web UI Configuration Files Advanced Settings->Network->VLAN->Port 0 aastra.cfg, .cfg Description This parameter is based on the Type of Service (ToS), Differentiated Services Code Point (DSCP) setting for SIP (tos sip parameter), RTP (tos rtp parameter) and RTCP (tos rtcp parameter). It is the mapping between the DSCP value and the VLAN priority value for SIP, RTP, and RTCP packets. You enter the tos priority map value as follows: (DSCP 1,Priority 1)(DSCP 2,Priority 2) (DSCP 64,Priority 64) where the DSCP value range is 0-63 and the priority range is 0-7. Mappings not enclosed in parentheses and separated with a comma, or with values outside the ranges, are ignored. Format Integer Default Value 3 (based on the default ToS DSCP SIP setting of 26) 5 (based on the default ToS DSCP RTP setting of 46) 5 (based on the default ToS DSCP RTCP setting of 46) Range 0 to 63 (for DSCP) 0 to 7 (for SIP, RTP, and RTCP priorities) Example tos priority map: (26,7) A-38 41-001160-01, Rev 00, Release 2.3 Operational, Basic, and Advanced Parameters The following table identifies the default DSCP-to-priority mapping structure. DSCP Range DSCP Priority 0-7 0 8-15 1 16-23 2 24-31 3 32-39 4 40-47 5 48-55 6 56-63 7 41-001160-01, Rev 00, Release 2.3 A-39 IP Phone Administrator Guide Operational, Basic, and Advanced Parameters PC Port (Ethernet Port 1) Parameters Parameter - vlan id port 1 VLAN ID (for PC Port in Web UI) IP phone UI Options->Administrator Menu-> Network Settings->VLAN-> Passthrough->VLAN ID Aastra Web UI Advanced Settings->Network->VLAN->Port 1 Configuration Files aastra.cfg, .cfg Description Specifies the VLAN ID used to pass packets through to a PC via Port 1. Note: If you set the VLAN id port 1 (passthrough port) to 4095, all untagged packets are sent to this port. The following is an example of configuring the phone on a VLAN where all untagged packets are sent to the passthrough port. Example You enable tagging on the phone port as normal but set the passthrough port (VLAN id port 1) to 4095. The following example sets the phone to be on VLAN 3 but the passthrough port is configured as untagged. tagging enabled: 1 VLAN id: 3 VLAN id port 1: 4095 Format Integer Default Value 1 Range 1 to 4095 Example VLAN id port 1: 3 A-40 41-001160-01, Rev 00, Release 2.3 Operational, Basic, and Advanced Parameters Parameter - QoS eth port 1 priority Priority (for PC Port in Web UI) IP phone UI Options->Administrator Menu-> Network Settings->VLAN->Passthrough ->Priority Aastra Web UI Advanced Settings->Network->VLAN->Port 1 Configuration Files aastra.cfg, .cfg Description...

Herunterladen

Geben Sie zwei Ziffern: