Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Anleitung Zusammenfassung
. Callers List This icon located just above the softkey allows access to the Callers List feature. Status Messages Display Message Description Microphone mute Indicates when the Mute button has been Activated Out of range Appears briefly when pressing a key if out of range of the base station Handset Keys Softkeys ( { or }) Your 6757i CT RP cordless handset has 2 softkeys directly under the LCD display. The softkey menus change depending on the phone’s state, displaying relevant softkeys only. These softkeys are pre-programmed for the call handling and extension management features. Talk /Hold v Key The Talk/Hold key v is a multi-purpose key with the following uses: • To initiate a call by seizing the line or through pre-dial. • To answer a call during ringing. • To place a call on hold during an active call. Pressing the hold key v while on a call places the call on hold. While a call is on hold, and if there are no other active calls, the LED flashes at the hold rate and the display presents the Call is on hold prompt. In addition, held call reminder tone is played in the form of a short ring burst (flash ring). 86 AastraLink RP Phone User Guide This handset is equipped with an auto-hold feature. While on an active call, pressing any other line key results in the current line being placed on hold and the new line being seized. Release Key ( y) The release key is a multi-purpose key with the following uses: • To end a call. Note: If handset is placed in the charger cradle, it also ends the call. • To silent the ringing during an incoming call. • To exit feature such as Menu (options), Directory, Callers, Redial, Predial. Note: Pressing this key in a feature will not terminate an active call. Mute Key ( . ) Use the mute key when you want to be able to hear a caller but have them not hear you. Press the . key to mute the handset. Press the . key again to disengage mute. The Microphone mute prompt is displayed when mute is activated. Response Point Key ( ) The Response point key connects you to the voice-activated dialing features of the AastraLink RP Solution. Use the 6757i CT RP Handset Response Point key just as you would the 6757i CT RP Base Unit Response Point key. • For a list of voice-dialing options, press , wait for the chime, and say "What can I say?" Feature Key List ( I ) The 6757i CT RP cordless handset supports a programmable feature key list for easy access to common features. The available features include line keys, intercom, directory, callers log, transfer, conference, and public/private call mode. For more information about the feature keys, see Feature Keys on the Handset on page 83. Menu List ( A ) The Menu list allows access to intercom calling, and personalization of handset including language, ring tone, vibrate, backlight and silent alert. Please refer to the section Using Your 6757i CT RP Cordless Handset on page 79 on. Multifunction Handset LED Indicator The multifunction Handset LED provides the following user feedback: • Flash: Message Waiting Indicator – Slow • Flash: Alerting – Rapid • Flash: Mute – intermittent • Flash: Hold – Intermediate • Solid: On an active call Using AastraLink RP Phone User Guide 87 Using Your 6757i CT RP Cordless Handset Battery Charging The handset is powered by a nickel metal hybrid battery pack, which must be charged using the provided handset cradle. To install and charge the battery, do the following. 1. Slide open the cover of the battery compartment. 2. Place the battery pack in the compartment with the connector wires pointing towards the bottom of the handset. 3. Connect the battery terminal wire to the charging pins located in the compartment 4. Slide the cover of the battery compartment back onto the handset 5. Place the handset, face up, in the charging cradle. The handset should easily slide into the charging cradle. If it does not, check the battery compartment cover to ensure it is in the proper position. To confirm that the battery is charging, check the battery icon symbol on the handset display to see if the lines inside the icon are flashing left to right. Note: The battery must be charged for a minimum of six hours prior to initial usage of the phone. Handset Battery Indicator & Status The display provides "at a glance" information on the handset battery. dcba The bars indicate the battery charge level — 4 for full, needs recharging when only 1 bar appear f The bars flashes when the battery is being recharged on the charger stand. Note: The handset is designed to recharge the batteries automatically when required and the handset is placed on the charger stand. The battery icon will not flash and the handset does not charge every time it is placed on the stand. If a defective battery is replaced, then the battery Icon is not identified until the new battery is charged for at least 2 minutes. Volume Control The volume key, located on the side of the handset, controls both the receiver and ringer volume. Note: The volume key can also be...