Lesen Sie die nachfolgende Bedienungsanleitung. Bewahren Sie diese Anleitung auf. Händigen Sie alle Unterlagen bei Weitergabe des Gerätes an Dritte aus. • Bestimmungsgemäßer Gebrauch Das Gerät ist für Elektroniklötungen im Freizeit- und Heimwerkerbereich vorgesehen. Es ist dabei für Anwendungen wie Lötarbeiten, Holzbrennen, Schweißkleben von Kunststoffen und das Aufbringen von Verzierungen bestimmt. Benutzen Sie das Gerät nur wie beschrieben und für die angegebenen Einsatzbereiche. Das Gerät

3. Clamp the workpiece between the two clips 5 . Q Solder sponge CAUTION! The hot soldering tip 2 must never be placed in contact with a dry solder sponge 8 , otherwise the solder sponge may be damaged. j The solder sponge 8 is used to clean soldering tips. j Moisten the solder sponge 8 before you use it. 14 GB/IE/CY Operation/Maintenance and cleaning grease or soldering fluid) as a flux. Clean the soldering tip 2 on the moist solder sponge 8 . After cleaning the tip 2 it must be “tinned” (coate

Children must never be allowed to play with the device. b) Remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury. GB/IE Safety advice Never touch the hot soldering tip or the molten solder. You could suffer burn injuries. Always let the device cool before you replace components on the device, clea

Workplace safety ...............................................................Page 9 2. Electrical safety..................................................................Page 9 3. Personal safety ...................................................................Page 10 4. Careful handling and use of electrical power tools ........Page 12 Original accessories / attachments.......................................Page 13 Before first use Fitting the helical spring ...............................

For this reason you should use the third hand to hold small workpieces. . Avoid placing the hot soldering tip in contact with the plastic parts of the multifunctional holder. Failure to observe this advice may result in damage to the device. . If a dangerous situation arises, pull the mains plug immediately out of the mains socket. CAUTION! DANGER OF POISONING! Do not breathe air contaminated with soldering fumes. When working with the device for long periods do not allow the fumes from solderin