Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
Workplace safety ...............................................................Page 9 2. Electrical safety..................................................................Page 9 3. Personal safety ...................................................................Page 10 4. Careful handling and use of electrical power tools ........Page 12 Original accessories / attachments.......................................Page 13 Before first use Fitting the helical spring .........................................................Page 13 Inserting / replacing soldering tips ........................................Page 13 Operation Switching on and off ..............................................................Page 14 Third hand ...............................................................................Page 14 Solder sponge.........................................................................Page 14 Soldering .................................................................................Page 15 Maintenance and cleaning ..................................Page 16 Service centre .................................................................Page 17 Warranty ............................................................................Page 17 Disposal ................................................................................Page 18 Declaration of Conformity / Manufacturer ..Page 19 GB/IE Introduction The following pictograms are used in these operating instructions / on the device: Read instruction manual! Observe caution and safety notes! Caution – electric shock! Danger to life! Risk of explosion! Risk of fire! Warning - Hot surfaces! V~ Volt (AC) W Watts (Effective power) Wear a breathing / dust mask, protective glasses, gloves and clothing. Keep children away from electrical devices! Check that the device, mains lead and plug are in good condition! Do not smoke! Do not eat! GB/IE Introduction Do not drink! Dispose packaging and appliance in an environmentally-friendly way! Fine soldering iron set PLBS 30 A1 Introduction Please make sure you familiarise yourself fully with the way the device works before you use it for the first time and that you understand how to handle it correctly. Please read the operating instructions below. Be careful to keep these advice notes and if necessary pass them on to a third party. Proper use The appliance is intended for electronic soldering for leisure and DIY purposes. It is designed for uses such as soldering work, wood-engraving, welding and gluing plastics and the application of decorations. Use the device only as described and for the indicated purposes. The device is not intended for commercial use. Any other use or modification to the device shall be considered as improper use and could give rise to considerable dangers. The manufacturer will not accept liability for loss or damage arising from improper use. GB/IE Introduction Features and equipment 123456 7891011 Soldering pencil Soldering tip Helical spring Clips Third hand Holder for copper attachments Multifunctional holder Soldering sponge Universal attachment Pointed attachment Conical attachment Included items 1 Fine soldering iron set PLBS 30 A1 1 Multifunctional holder 1 Tin solder, 20 grams 2 Soldering tips (1x installed) 4 Copper attachments (engraving tips) 1 Solder sponge 1 Operating instructions Technical information Electricity supply: 230 V~ Frequency: 50 Hz Power consumption: 30 W GB/IE Safety advice Safety advice . CAUTION! Failure to observe the instructions and advice given below may result in electric shock, fire and/or serious injury. 1. Workplace safety a) Keep your working area clean and well lit. Untidy or poorly lit working areas can lead to accidents. b) Do not work with the device in potentially explosive environments in which there are inflammable liquids, gases or dusts. Electrical power tools create sparks, which can ignite dusts or fumes. c) Keep children and other people away while you are operating the electrical tool. Distractions can cause you to lose control of the device. 2. Electrical safety To avoid danger to life from electric shock: a) The mains plug on the device must match the mains socket. The plug must not be modified in any way. Do not use an adapter plug with devices fitted with a protective earth. Unmodified plugs and matching sockets reduce the risk of electric shock. b) Keep the device away from rain or moisture. Water entering an electrical device increases the risk of electric shock. GB/IE d) Safety advice c) Use a residual current device (RCD) for protection if operating the electrical power tool in a moist environment is unavoidable. The use of an RCD reduces the risk of electric shock. Do not use the mains lead for any purpose for which it was not intended, e.g. to carry the device, to hang up the device or to pull the mains plug out of the mains socket. Keep the mains lead away from heat, oil, sharp edges or moving parts of the device. Damaged or tan...