Login:
heruntergeladen wurde: 11   Dateigröße: 280 kb   Hersteller: Black & Decker  
Kategorie: Lötlampen
@name@name@name@name

MINI-IRON - Use for iron-ons, fusible webbing and tapes, applique quilting, 3 632901-00 Iron 10/24/05 12:37 PM Page 4 Assembly 21 Tip Storage A handy storage bin is built-in to the Craft Iron. Insert the coiled spring support into the Craft Iron To remove the bin from the base of the unit, ( figure 1) base by aligning the protrusions on the press in on the sides and pull out as shown in support with the slots in the opening. Push the figure 4. support straight in until it “clicks” into place. WA

heruntergeladen wurde: 0   Dateigröße: 2 mb   Hersteller: Black & Decker  
Kategorie: Lötlampen
@name

It will solder from 35 to 100 joints per charge, depending upon type of application. A finger-tip ON-OFF button is provided for safety and convenience. For operational safety and proper use of the Soldering Pencil, please read all safety rules and instructions. Don’t forget to send in the guarantee registration card. THANK YOU FOR BUYING BLACK & DECKER! SOLDERING PENCIL SAFETY RULES 1. WHEN NOT IN USE, store the tool in a dry, high or locked-up place — out of the reach of children. 2. KEEP

heruntergeladen wurde: 0   Dateigröße: 2 mb   Hersteller: Black & Decker  
Kategorie: Lötlampen
@name

However, after several charge and discharge cycles, the battery will be back up to its full capacity. 3. While charging, the Charger may hum and become warm to touch. This is a normal condition* and does not indicate a problem. 4. If the battery does not charge properly—(!) check power supply at receptacle by plugging in a lamp or other appliance, (2) check to see if receptacle is connected to a light switch which turns power of when you turn out the lights, 5. Whenever you unplug the Charger

heruntergeladen wurde: 1   Dateigröße: 2 mb   Hersteller: Black & Decker  
Kategorie: Lötlampen
@name

Be sure that the soldering ip has been freshly tinned. When you press the switch button, the work light will come on and the tip will start heating immediately. In about 6 seconds, with light pressure, toucfi the tip to the connection, and at the same time, feed the solder to the spot being heated by the tip. After enough solder melts to just cover the connection, release the button, lift the tip and ailow solder to cool. Do not disturb the connection until solder has hardened. Pencil can be pl

heruntergeladen wurde: 0   Dateigröße: 280 kb   Hersteller: Black & Decker  
Kategorie: Lötlampen
@name@name@name@name

IN MOST CASES, A BLACK & DECKERREPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU HAVE A SUGGESTION OR COMMENT, GIVE US A CALL. YOUR FEEDBACK IS VITAL TO BLACK & DECKER. SAVE THIS MANUAL FOR FUTURE REFERENCE. VEA EL ESPANOL EN LA CONTRAPORTADA. POUR LE FRANCAIS, VOIR LA COUVERTURE ARRIERE. INSTRUCTIVO DE OPERACION, CENTROS DE SERVICIO YPOLIZA DE GARANTIA. ADVERTENCIA: LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. Welcome to the Wonderful World of Black & Decker Craft Products. Yo





Kategorien