1) To set the AUTO-OFF timer, the unit must be turned on (I/O switch) and operational. 2) Press the TIMER-OFF key pad to initiate the AUTO-OFF time sequence. Fig. 33. The display window will indicate TIMER-OFF and the word OFF will flash for 5 seconds. Press the or key pad to select the desired AUTO-OFF time. Fig. 33a. key pad will decrease the AUTO-TIMED setting in 10 minute increments. keypad will increase the AUTO-TIMED setting in 10 minute increments. When the desired time is established, (t

IMPORTANT: Never operate the unit without the air filter in place. AIR FILTER CLEANING STEPS: 1) Pull the air filter out gently (Fig. 4). 2) Clean the filter with a vacuum cleaner, or wash it with clean water and dry with a dry cloth. 3) Put the clean air filter back in place and continue to operate the dehumidifier. Fig. 4 Fig. 5 9 CONTINUOUS DRAIN INSTRUCTIONS When using the continuous drain function, the PVC hose must be placed horizontally INSTALLING PVC below the drainage hole. Avoid uneven

3 ELECTRICAL SPECIFICATIONS 1) All wiring must comply with local and national electrical codes and be installed by a qualified electrician. If you have any questions regarding the following instructions, contact a qualified electrician. 2) Check available power supply and resolve any wiring problems BEFORE installation and operation of this unit. 3) For your safety and protection, this unit is grounded through the power cord plug when plugged into a matching wall outlet. If you are not sure whet

3) Make sure the water tank is correctly located. After switching on the machine for the first time, if the “Bucket Full” light illuminates, pull out the water tank, and check that the “float” lever is able to move freely, then return the water tank to the correct position (Fig.2). Fig. 1 Fig. 2 WATER FULL When the water tank is full and/or incorrectly positioned inside the cabinet, the water INDICATOR full red light turns on and remains on until such time that the tank is emptied and/or LIGHT(R

Pour obtenir le service, consultez votre centre de service le plus rapproche ou composez le : R 1-800-26- (1-800-263-2629) qui vous recommandera un centre regional. Para obtener servicio, comuniquese con el taller mas cercano o llame al: R 1-800-26- (1-800-263-2629) para preguntar por un taller de reparaciones en su area. . R Portable 3 Season Home Comfort The model number can be found on the serial plate located on the back panel of the unit. All repair parts available for purchase or special o

Keep all doors and windows closed. FEATURES • Soft touch (Electronic) Control Key Pads • Full Bucket Indicator Light • Auto-Sensing Humidity Control • Easy Roll Castors (4) • Adjustable Humidity Settings (35% - 80%) • Front Mounted Water Tank (Removable) • 2 Fan Speed Settings (High / Low) • Direct Drain Option (HOSE NOT INCLUDED) • Delay Start Protection (Compressor) • Quiet Operation • Auto-Defrost (De-Icer) • Removable Air Filter Control Panel Handle Moist Air Intake Air Filter Drain Bucket C

The time taken todefrost may vary. If the machine freezes up, it should be turned off at the power supply and re-started. If the room temperature remains below 5°C the machine should be switched off. DEHUMIDIFYING Dehumidifying is a means of removing moisture fromthe air. A dehumidifier will help to protect your homeand valued possessions from damage (swelling) caused by moisture in the air. Essentially a dehumidifier removes moisture from the air as the moist air passes over a dehumidifying (ev

PRECAUTION: Veuillez lire attentivement les consignes de securite et les directives d’utilisation avant l’utilisation initiale de ce produit. CAUTION: Read and follow all safety rules and operating instructions before first use of this product. PRECAUTION: Veuillez lire attentivement les consignes de securite et les directives d’utilisation avant l’utilisation initiale de ce produit. PORTABLE DEHUMIDIFIER Owner’s Use and Care Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 FACTORY Each time the unit is disconnected/re-connected and/or in the event of a power failure, DEFAULT SETTING the electronic circuitboard automatically defaults to the following factory setting: Humidity Setting: 60%program setting was different from the above (defaultFan Speed: Low setting) it will be necessary to re-program your settings.When the unit is switched “Off” manuallyNOTE: In the event of a power failure, all previous(using the on/off keypad) the unit will always defaultsettings