Stimmen - 4, Durchschnittliche Bewertung: 4.8
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
To select a desired CD Press one of the DIRECT PLAY buttons during 1 Disc Shuffle Play. Tips • You can start Shuffle Play during Normal Play by pressing PLAY MODE repeatedly until “SHUFFLE” appears in the display. • To skip a track, turn the jog dial clockwise (or press AMS +on the remote). Programming CD tracks –– Program Play You can create a program of up to 32 tracks from all the CDs in the order you want them to be played. 2 Press FUNCTION repeatedly until “CD” appears in the display. 3 Press PLAY MODE repeatedly until “PROGRAM” appears in the display. 4 Press DISC SKIP to select a CD. 2 5 Turn the jog dial until the desired track appears in the display. LBT-D290/D590/G3300/XB3/XB3K/XB4/XB4K/XB30 Disc number Total playing time Track number DOLBY NR OFF PROGRAM LBT-D690/D990/XB600/XB6/XB6K Disc number Track number DISC PROGRAM DOLBY NR OFF Total playing time 8 CHECK CLEAR 14 5 3,6 p p 6 Press PLAY MODE once. The track is programmed. “STEP” and the programmed playing order appear, followed by the total playing time. LBT-D290/D590/G3300/XB3/XB3K/XB4/XB4K/XB30 The last programmed track 1 Place CDs and close the front cover. LBT-D690/D990/XB600/XB6/XB6K Total playing time The last programmed track Total playing time DOLBY NR OFF PROGRAM DISC DISC PROGRAM DOLBY NR OFF 7 Repeat steps 4 through 6 to program additional tracks. Skip step 4 to select tracks from the same disc. 8 Press a. All the tracks play in the order you selected. To cancel Program Play Press PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display. To Press Check the program CHECK on the remote repeatedly. After the last track, “CHECK END” appears. Clear the last selected CLEAR on the remote track in stop mode. Clear a specific track CHECK on the remote repeatedly until the number of the track to be cleared lights up, then press CLEAR. Add a track to the 1 Press DISC SKIP to program select a CD. 2 Turn the jog dial to select a track. 3 Press PLAY MODE. Clear the entire ponce in stop mode or program twice while playing. Tips • The program you created remains in the CD player's memory even after it has been played. Press ato play the same program again. • If “--.--” appears instead of the total playing time while programming, this means: – you have programmed a track numbered over 20, or – the total playing time has exceeded 100 minutes. Playing CDs without interruption –– Non-Stop Play You can play CDs without pausing between tracks. 1 23 1 Press FUNCTION repeatedly until “CD” appears in the display. 2 Press NON-STOP so the indicator on this button lights up. 3 Press a. To cancel Non-Stop Play Press NON-STOP so the indicator on this button goes off. The Tape Deck The Tape Deck Recording on a tape manually You can record from CDs, tapes, or the radio as you like. For example, you can record just the songs you want or begin recording from the middle of the tape. The recording level is adjusted automatically. 2 DOLBY »p 4 4 NR 5 13 1 Insert a blank tape into deck B. 2 Press FUNCTION repeatedly until the source you want to record (e.g., CD) appears in the display. 3 Press rREC. Deck B stands by for recording, and the indicator on the abutton (for the front side) lights up green. 4 Press DIRECTION repeatedly to select Ato record on one side or §(or RELAY) to record on both sides. 5 Press Pon deck B. Recording starts. 6 Start playing the source to be recorded. To Press Stop recording pon deck B Pause recording Pon deck B Tips • If you want to record on the reverse side, press . so the indicator on the » button (for the reverse side) lights up green. • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR before step 5 so “DOLBY NR B” appears in the display. Recording CDs by specifying the track order — Program Edit You can record tracks from all the CDs in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape. 12 21113 3 pp 91 5 EDIT 6 4,7 CHECK 1 Place CDs and close the front cover. 2 Insert a blank tape into deck B. 3 Press FUNCTION repeatedly until “CD” appears in the display. 4 Press PLAY MODE repeatedly until “PROGRAM” appears in the display. 5 Press DISC SKIP to select a CD. 6 Turn the jog dial until the desired track appears in the display. LBT-D290/D590/G3300/XB3/XB3K/XB4/XB4K/XB30 Disc number Track number DOLBY NR OFF PROGRAM Total playing time (including selected track) LBT-D690/D990/XB600/XB6/XB6K Disc number Track number DISC PROGRAM DOLBY NR OFF Total playing time (including selected track) continued Recording CDs by specifying the track order (continued) 7 Press PLAY MODE once. The track is programmed. “STEP” and the programmed playing order appear, followed by the total playing time. LBT-D290/D590/G3300/XB3/XB3K/XB4/XB4K/XB30 The last programmed track DOLBY NR OFF PROGRAM DISC Total playing time LBT-D690/D990/XB600/XB6/XB6K The last programmed track DISC PROGRAM DOLBY NR OFF Total playing time 8 Repeat ...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - LBT-XB3K (782.87 kb)
Stereoanlage - LBT-XB6 (782.87 kb)
Stereoanlage - LBT-XB6K (782.87 kb)