Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
6 2 3,4 Adjusting the graphic equalizer You can adjust the sound by raising or lowering the levels of specific frequency ranges. Before operation, first select the basic audio emphasis you want for your sound. 1 Select the basic audio emphasis you want for your sound. (see “Selecting the audio emphasis.”) 2 Press GEQ CONTROL. The frequency range appears and the level value flashes in the display. 3 Press GEQ B/brepeatedly to select a frequency band. LBT-D290/D590/G3300/XB3/XB3K/XB4/XB4K/XB30 DOLBY NR OFF ALL DISC S LBT-D690/D990/XB600/XB6/XB6K 4 Press GEQ V/vto adjust the level. LBT-D290/D590/G3300/XB3/XB3K/XB4/XB4K/XB30 DOLBY NR OFF ALL DISC S LBT-D690/D990/XB600/XB6/XB6K DISCALL DOLBY NR OFF 63 250 4K 16K(Hz) S 5 Repeat steps 3 and 4 to adjust the other frequency bands. 6 Press ENTER when finished. Note If you choose another audio emphasis (other than “EFFECT OFF”), the adjusted sound effect is lost. To retain the adjusted sound effect for future use, store it in a personal file (see “Making a personal audio emphasis file”). Activating the surround effect You can enjoy the surround effect. SURROUND – + »» 9 »» /Press SURROUND so “SUR ” appears in the display. Note If you choose other sound effects, the surround effect will be canceled. To retain the effect, store it in a personal file (see “Making a personal audio emphasis file”). DISCALL DOLBY NR OFF 63 250 1K 4K 16K(Hz) S Making a personal audio emphasis file — Personal File You can create personal files of audio patterns (surround effect and graphic equalizer) and store them in the unit's memory. Later call up an audio pattern to play a favorite tape, CD, or radio program. You can create up to five audio files. Before operation, first select the basic audio emphasis you want for your sound. 2 43 1 Create the sound effect you want by using the graphic equalizer and surround effect (see “Adjusting the audio emphasis”). 2 Press P FILE MEMORY. A personal file number appears in the display. LBT-D290/D590/G3300/XB3/XB3K/XB4/XB4K/XB30 DOLBY NR OFF ALL DISC S LBT-D690/D990/XB600/XB6/XB6K 4 Press ENTER. The adjusted sound effects are stored under the selected file number. Any settings previously stored at this memory location are erased and replaced by the new settings. To call up the personal file 1 Press GEQ V/v(or MUSIC MENU V/von the remote) repeatedly to display the last selected personal file. 2 Press GEQ B/b(or MUSIC MENU B/bon the remote) repeatedly to select the desired personal file. DISCALL DOLBY NR OFF S 3 Press GEQ B/bto select the file number (P FILE) where you want to store the sound effect. Other Features Other Features Singing along: Karaoke You can sing along with any stereo CD or tape by turning down the singer’s voice. You need to connect an optional microphone. 1,5 4 23 1 Turn MIC LEVEL to MIN to turn down the microphone level. 2 Connect an optional microphone to the MIC (MIC 1*) jack. When you use two microphones at the same time, connect the other one to the MIC 2* jack. (* LBT-XB3K/XB4K/XB6K only) 3 Press KARAOKE PON/MPX repeatedly to obtain the desired karaoke effect. Each time you press this button, the display changes as follows: KARAOKE PON nMPX R nMPX L EFFECT OFF (ON) N “h” appears in the display when the karaoke mode is activated. To Select Reduce the singer's KARAOKE PON voice on a CD or tape Reduce the left channel MPX R on a multiplex CD or tape. Reduce the right MPX L channel on a multiplex CD or tape. 4 Start playing the music and adjust the volume. 5 Turn MIC LEVEL to adjust the microphone volume. When you are done Turn MIC LEVEL to MIN and disconnect the microphone from MIC, then press KARAOKE PON/MPX repeatedly until “h” disappears from the display. n continued Singing along: Karaoke (continued) Adjusting the microphone echo (LBT-XB3K/XB4K/XB6K only) ECHO LEVEL /Turn ECHO LEVEL to adjust the echo effect. To cancel the echoing Turn ECHO LEVEL to MIN. Adjusting the key (LBT-XB3K/XB4K/XB6K only) n/. /Press .or n. You can adjust the key higher or lower in 13 halftone steps (–3.0 to 3.0). Mixing and recording sounds 55 4 p 23 1 Prepare the microphone and the karaoke effect. Then, insert a blank tape in deck B. 2 Press FUNCTION repeatedly to select the source you desire and set it to pause mode. 3 Press rREC. 4 Press P. 5 Press ato start playing the CD (or tape in deck A). Playback starts. Start singing along with the music. To stop recording Press pon deck B. Tips • If acoustic feedback (howling) occurs, move the microphone away from the speakers or change the direction of the microphone. • If you want to record your voice through the microphone only, you can do so by selecting the CD source and not playing a CD. Notes • If you press EFFECT or select a sound effect. The karaoke mode is canceled. • The instrumental sound may be reduced as well as the singer’s voice when the source sound was recorded monaurally. • The singer’s voice may not be reduced when: — only a few instruments are playing — a duet is being sung — the source ...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - LBT-XB3 (782.87 kb)
Stereoanlage - LBT-XB3K (782.87 kb)
Stereoanlage - LBT-XB6 (782.87 kb)