Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
With the label side up. When you play a CD single, place it on the inner circle of the tray. »» 6Pr0) 6 » Pp »» p60)p)0 4 Close the front cover. 5 Press DISC SKIP repeatedly until the disc number you want to record appears in the playing position indicator. 6 Press CD SYNC. Deck B stands by for recording and the CD player stands by for playback, and the indicator on the abutton (for the front side) lights up green. 7 Press DIRECTION repeatedly to select Ato record on one side or §(or RELAY) to record on both sides. 8 Press Pon deck B. Recording starts. To stop recording Press pon deck B or on the CD player. Tips • If you want to record on the reverse side, press . so the indicator on the » button (for the reverse side) lights up green. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR before step 8 so “DOLBY NR B” appears in the display. • To record with the surround effect, press SURROUND so “SUR ” appears in the display. The equalizer settings will not be recorded. Note You cannot listen to other sources while recording. Listening to the radio — Preset Tuning Before using this function, preset radio stations in the tuner’s memory (see “Step 3: Presetting radio stations”). 234STEREO/MONO VOLUME1 PRESET +/– TUNER/BAND VOLUME +/– 1 Press POWER (I/ufor LBT-D990/ XB30) to turn on the power. 2 Press TUNER/BAND repeatedly until the band you want appears in the display. Each time you press this button, the band changes as follows: FM .AM n 3 Press TUNING MODE repeatedly until “PRESET” appears in the display. MANUAL nAUTO nPRESET 4 Press TUNING +/– (or PRESET +/– on the remote) to tune in the desired preset station. LBT-D290/D590/G3300/XB3/XB3K/XB4/XB4K/XB30 Preset number Frequency DOLBY NR OFF TUNED STEREO PRESET ALL DISC S MHz LBT-D690/D990/XB600/XB6/XB6K Preset number Frequency To Do this Turn off the radio Press POWER. Basic OperationsDISCALL S DOLBY NR OFF PRESET TUNED STEREO MHz Adjust the volume Turn VOLUME (or press VOLUME +/– on the remote). To listen to non-preset radio stations Press TUNING MODE repeatedly in step 3 until “MANUAL” appears, then press TUNING +/– to tune in the desired station. Tips • Pressing TUNER/BAND while the system power is off automatically turns on the system and tunes to the last received station (One Touch Play). • You can switch from another source to the radio just by pressing TUNER/BAND (Automatic Source Selection). • If an FM program is noisy, press STEREO/ MONO so “MONO” appears in the display. There will be no stereo effect, but the reception will improve. Press this button again to restore the stereo effect. • To improve broadcast reception, move the supplied antennas. Recording from the radio You can record a radio program on a tape by tuning in a preset station. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is automatically adjusted. SURROUND 1 432 4 Press TUNING +/– to tune in a preset station. LBT-D290/D590/G3300/XB3/XB3K/XB4/XB4K/XB30 Preset number DOLBY NR OFF TUNED STEREO PRESET ALL DISC S MHz 5 Press 6EJECT and insert a blank tape into deck B. With the side you want to record on facing forward »» 6Pr0) 6 »» p0)pFrequency LBT-D690/D990/XB600/XB6/XB6K Preset number Frequency DISCALL DOLBY NR OFF PRESET TUNED STEREO MHzS DOLBY NR »p 7 856 1 Press POWER (I/ufor LBT-D990/ XB30) to turn on the power. 2 Press TUNER/BAND repeatedly until the band you want appears in the display. 3 Press TUNING MODE repeatedly until “PRESET” appears in the display. 6 Press rREC. Deck B stands by for recording, and the indicator on the abutton (for the front side) lights up green. 7 Press DIRECTION repeatedly to select Ato record on one side or §(or RELAY) to record on both sides. 8 Press Pon deck B. Recording starts. To stop recording Press pon deck B. Tips • If you want to record on the reverse side, press . so the indicator on the » button (for the reverse side) lights up green. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • To record non-preset stations, select “MANUAL” in step 3, then press TUNING +/– to tune in the desired station. • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR before step 8 so “DOLBY NR B” appears in the display. • To record with surround effect, press SURROUND so “SUR ” appears in the display. The equalizer settings will not be recorded. • If noise is heard while recording from the radio, move the appropriate antenna to reduce the noise. Playing a tape You can play any type of tape, TYPE I (normal), TYPE II (CrO2) or TYPE IV (metal). The deck automatically detects the tape type. To select either deck A or B, press DECK A (or DECK B (on the remote. 0/ 0/ 14 ) VOLUME 4 ) Basic Operations p DO...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - LBT-XB3 (782.87 kb)
Stereoanlage - LBT-XB6 (782.87 kb)
Stereoanlage - LBT-XB6K (782.87 kb)