Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Auto . Low . Medium . High Result: Each time you press the button, the indoor unit beeps. 5 To control the airflow direction, refer to page 20. 08'Moderato_IB_28593A_IB_E.indd 17 2007-12-27 9:06:03 E-18 Selecting Mode mode helps users to fall asleep well after going to bed whether being too hot to sleep or being awakened by coldness. The mode can be selected only when the air conditioner is switched on in cool/heat mode. 1 Press the (On/Off) button. Result: . The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button to select cool or heat mode. Result: . The indoor unit beeps each time you press the button. . The air conditioner runs in cool or heat mode. 3 Press the button. Result: . The timer indicator is displayed. . The Off timer is blinking on the remote control. 4 To set the Off timer, press the buttons once or more times until the required Off time is displayed. Result: . The mode will be automatically stopped in 8 hours if the operation time is not set. . You can set the Off timer by pressing the buttons to turn off the mode automatically at the appointed time within a range of 30 minutes to 12 hours. . Each time the buttons are pressed, the time is increased by 30 minutes or 1 hour. mode will be stopped at the appointed off time. 5 Press the button. Result: The remaining time is displayed. Note In the case of selecting mode or adjusting the extra time for mode, you should press the button within 10 seconds. If you do not press the button within 10 seconds, mode will be canceled automatically. 6 Press the button to adjust the temperature until the desired temperature is displayed. You can set the temperature between 16°C and 30°C. Result: Each time you press the button; - The temperature adjusts by 1°C - The indoor unit beeps 08'Moderato_IB_28593A_IB_E.indd 18 2007-12-27 9:06:09 E-19 ENGLISHTemperature changes in mode To prevent excessive cooling/heating during sleep, the mode automatically modifies the temperature setting in accordance with the time setting. Temperature and air current change according to the three stages; Falling asleep, Sound sleep, and Waking up from mode, and then the air conditioner will automatically turn off when the set time has elapsed. Three stage prevents you from having difficulty sleeping on extremely hot/cold nights. ..Falling asleep : Eases you into sleep by dropping the temperature. ..Sound sleep : Relaxes your body and raises your temperature slightly. ...Waking up from mode : Allows you to wake up to comfortable crisp air making you feel refreshed and energized. • Set the Off timer in mode for more than 5 hours. Sleep may be disturbed if the mode is set for too short or too long a time because the temperature changes are set to an 8-hour cycle. • If the mode is set for less than 4 hours, the operation will stop at the set time. If the mode is set for over 5 hours, the last hour will run in Waking Up st...
Dieses Handbuch ist für folgende Modelle:Splitgeräte - AQ09MSDN (10.56 mb)
Splitgeräte - AQ09MSDX (10.56 mb)
Splitgeräte - AQ09MWD (10.56 mb)
Splitgeräte - AQ09MWDN (10.56 mb)