Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
If the room temperature is higher than the selected temperature, the air conditioner starts cooling. . If the room temperature reaches the set temperature, the air conditioner stops cooling, but the fan continues to operate. 4 Press the button to select the fan speed until the required setting is displayed. Auto . Low . Medium . High Result: Each time you press the button, the indoor unit beeps. 5 To control the airflow direction, refer to page 20. 08'Moderato_IB_28593A_IB_E.indd 13 2007-12-27 9:05:51 E-14 Selecting Heat Mode You can select Heat mode if you want to heat your room. You can adjust the temperature and the fan speed when heating. 1 Press the (On/Off) button. Result: . The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button on the remote control until Heat is displayed. Result: . The indoor unit beeps each time you press the button. . The air conditioner runs in Heat mode. Note You can change modes at any time. 3 Press the button to adjust the temperature until the required temperature is displayed. You can set the temperature between 16°C and 30°C. Result: . Each time you press the button: - The temperature adjusts by 1°C - The indoor unit beeps . If the room temperature reaches the set temperature (selected temperature+5°C), the air conditioner stops heating,but the fan is still operating. . The air conditioner starts heating, provided that the room temperature is lower than the desired temperature (selected temperature+3°C). 4 Press the button to select the fan speed until the required setting is displayed. Auto . Low . Medium . High Result: . Each time you press the button, the indoor unit beeps. . For the first 3~5 minutes, the fan may not operate to prevent cool air from flowing out of the indoor unit. This helps to warm the air in your room sufficiently. 5 To control the airflow direction, refer to page 20. 08'Moderato_IB_28593A_IB_E.indd 14 2007-12-27 9:05:54 E-15 ENGLISH Selecting Dry Mode Select Dry mode if you want to dehumidify your room. You can adjust the temperature in this mode. 1 Press the (On/Off) button. Result: . The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button on the remote control until Dry is displayed. Result: . The indoor unit beeps each time you press the button. . The air conditioner runs in the Dry mode. Note You can change modes at any time. 3 Press the button to adjust the temperature until the required temperature is displayed. You can set the temperature between 18°C and 30°C. Result: . Each time you press the button: - The temperature adjusts by 1°C - The indoor unit beeps . The air conditioner starts dehumidifying and the fan speed adjusts automatically. 4 To control the airflow direction, refer to page 20. 08'Moderato_IB_28593A_IB_E.indd 15 2007-12-27 9:05:56 E-16 Selecting Fan Mode Sele...
Dieses Handbuch ist für folgende Modelle:Splitgeräte - AQ09MSDN (10.56 mb)
Splitgeräte - AQ09MSDX (10.56 mb)
Splitgeräte - AQ09MWD (10.56 mb)
Splitgeräte - AQ09MWDN (10.56 mb)